HomeThe following table summarizes the devices supported by sane-backends-1.0.18.
This is only a summary! Please consult the manpages and the author-supplied webpages for more detailed (and usually important) information concerning each backend.
If you have new information or corrections, please file a bug report with as many details as possible. Also please tell us if your scanner isn't mentioned in this list at all.
For an explanation of the tables, see the legend.
|
Device type |
Number of devices |
|||||||
|---|---|---|---|---|---|---|---|---|
|
Total |
Supported |
Untested |
Unsupported |
|||||
|
Sum |
Complete |
Good |
Basic |
Minimal |
||||
|
1273 |
648 |
176 |
348 |
104 |
20 |
126 |
373 |
|
|
5 |
5 |
1 |
2 |
2 |
0 |
0 |
0 |
|
|
11 |
3 |
0 |
1 |
0 |
2 |
3 |
2 |
|
|
2 |
n/a |
|||||||
|
5 |
n/a |
|||||||
Manufacturers: Abaton, Acer Peripherals, Across Technologies, Actown, Adlib, AGFA, Ambir, Apple, Aries, Artec/Ultima, Avigramm, Avision, Bell and Howell, Bell+Howell, Benq (Acer), BlackWidow, Boeder, BrightScan, Brother, C-Channel, Canon, Chinon, Compaq, Compeye, Corex, Cybercom, Dell, Devcom, Dextra, E-Lux, EDGE, Enhans, Epson, Escom, Escort, Fujitsu, Gallery, Genius, Googlegear, Guillemot, Guillemot / Hercules, Hercules, Hewlett-Packard, IBM, IOMagic, Iris, iVina, Kodak, Komodo, Konica Minolta, LEO, Lexmark, Linotype Hell, Logitech, Medion/Lifetec/Tevion/Cytron, Memorex, Micromaxx, Microstar, Microtek, Minolta, Minolta-QMS, Mitsubishi, Mustek, NEC, Network, Nikon, Olivetti, Olympus, Optoelectronics, Optrox, Packard Bell, Panasonic, Pentax, PIE, PIOTECH, PLANon, Plustek, Primax, Prolink, Quato, Reflecta, Relisys, RevScan, Ricoh, Scanport, Scanshell, Sceptre, Sharp, Sicos, Siemens, SmartDisk, Spot Technology, Syscan, Tamarack, Targa, TCE, Teco, Tiny, TriGem, Trust, UMAX, Vantas, Visioneer, Viviscan, Vobis, Vuego, Xerox, Yakumo
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Scan 300/GS |
SCSI |
|
Complete |
All known modes and functions supported |
abaton |
|
|
Scan 300/S |
SCSI |
|
Untested |
Untested, use with caution |
abaton |
Comment: Company was renamed to Benq.
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
FS-1130 |
SCSI |
|
Good |
FCC ID LUZFS1130 |
leo
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
ACT Scan I 30 |
SCSI |
|
Untested |
sub model VM3520A |
teco1
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
JetScan630 |
SCSI |
|
Good |
|
pie
|
|
|
JetScan636PRO |
SCSI |
|
Untested |
|
pie
|
Link(s): http://www.agfa.com/, http://www.agfa.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Arcus 1200 |
SCSI |
|
Good |
Optional transparency unit supported. |
SnapScan
|
|
|
Arcus II |
SCSI |
|
Good |
Arcus *II*, not Arcus! |
microtek
|
|
|
DuoScan |
SCSI |
|
Basic |
|
microtek
|
|
|
USB IEEE-1394 |
0x06bd/0x02bf |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
DuoScan T2000XL |
SCSI |
|
Unsupported |
Unsupported. Same as Microtek ArtixScan 2020? |
unsupported
|
? |
|
DuoScan T2500 |
SCSI IEEE-1384 |
|
Unsupported |
Unsupported. Same as Microtek Artixscan 2500f |
unsupported
|
? |
|
Focus Color |
SCSI |
|
Good |
3-pass |
agfafocus |
|
|
Focus Color Plus |
SCSI |
|
Good |
3-pass |
agfafocus |
|
|
Focus GS Scanner |
SCSI |
|
Untested |
6 bit gray |
agfafocus |
|
|
Focus II |
SCSI |
|
Untested |
gray only |
agfafocus |
|
|
Focus Lineart Scanner |
SCSI |
|
Untested |
Lineart only? Untested. |
agfafocus |
|
|
SnapScan |
SCSI |
|
Good |
|
SnapScan
|
|
|
SnapScan 300 |
SCSI |
|
Good |
|
SnapScan
|
|
|
SnapScan 310 |
SCSI |
|
Good |
|
SnapScan
|
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
SnapScan 600 |
SCSI |
|
Good |
Optional ADF supported. |
SnapScan
|
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
SnapScan 1212U |
USB |
0x06bd/0x0001 |
Good |
|
SnapScan
|
|
|
SnapScan 1212U_2 |
USB |
0x06bd/0x2061 |
Good |
|
SnapScan
|
|
|
SnapScan 1236s |
SCSI |
|
Good |
Optional ADF and transparency unit supported. |
SnapScan
|
|
|
SnapScan 1236u |
USB |
0x06bd/0x0002 |
Good |
Optional ADF and transparency unit supported. |
SnapScan
|
|
|
SnapScan e10 |
USB |
0x06bd/0x2093 |
Good |
|
SnapScan
|
|
|
SnapScan e20 |
USB |
0x06bd/0x2091 |
Good |
|
SnapScan
|
|
|
SnapScan e25 |
USB |
0x06bd/0x2095 |
Good |
|
SnapScan
|
|
|
SnapScan e26 |
USB |
0x06bd/0x2097 |
Good |
|
SnapScan
|
|
|
SnapScan e40 |
USB |
0x06bd/0x208d |
Good |
|
SnapScan
|
|
|
SnapScan e42 |
USB |
0x06bd/0x20ff |
Good |
|
SnapScan
|
|
|
SnapScan e50 |
USB |
0x06bd/0x208f |
Good |
Optional tranparency unit supported |
SnapScan
|
|
|
SnapScan e52 |
USB |
0x06bd/0x20fd |
Good |
Optional tranparency unit supported |
SnapScan
|
|
|
SnapScan e60 |
USB |
|
Untested |
|
SnapScan
|
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
Snapscan Touch |
USB |
0x06bd/0x0100 |
Complete |
|
niash
|
|
|
StudioScan |
SCSI |
|
Good |
|
microtek
|
|
|
StudioScan II |
SCSI |
|
Good |
|
microtek
|
|
|
StudioScan IIsi |
SCSI |
|
Good |
|
microtek
|
|
|
Studiostar |
SCSI |
|
Minimal |
Is detected but scans are very dark |
microtek
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0a82/0x4600 |
Unsupported |
Not supported. LM9832. See link for details. |
unsupported
|
? |
Link(s): http://developer.apple.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Apple Scanner |
SCSI |
|
Good |
4bit, 16 shades of gray |
apple |
|
|
ColorOneScanner |
SCSI |
|
Minimal |
truecolor (needs much work) but it scans in non color modes. |
apple |
|
|
OneScanner |
SCSI |
|
Basic |
8bit, 256 shades of gray. The backend needs work especially in the quantization code but it may work. |
apple |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Scan-It Pro 4800 |
Parport (SPP, EPP) |
|
Complete |
use driver-switch mov=2 |
plustek_pp
|
Link(s): http://www.artecusa.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x05d8/0x4001 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
A6000C |
SCSI |
|
Complete |
all modes working |
artec
|
|
|
A6000C PLUS |
SCSI |
|
Complete |
f/w <= v1.92 basic, f/w >= v1.93 OK |
artec
|
|
|
AM12e+ |
Parport |
|
Unsupported |
Unsupported. Chips found inside: AT015, AD9816JS. Maybe similar to SCSI version or as6e? |
unsupported
|
? |
|
AM12S |
SCSI |
|
Complete |
all modes working |
artec
|
|
|
AS6E |
Parport |
|
Basic |
Requires the program 'as6edriver' to run. |
as6e
|
|
|
AT3 |
SCSI |
|
Complete |
all modes working |
artec
|
|
|
AT6 |
SCSI |
|
Good |
Scan head needs to return home before another scan can be started. |
artec
|
|
|
AT12 |
SCSI |
|
Complete |
all modes working |
artec
|
|
|
E+ 48U |
USB |
0x05d8/0x4003 |
Good |
CIS scanner based on the GT6816 chip. Apparently all other devices are re-badged Artec scanners. |
artec_eplus48u |
|
|
E+ Pro |
USB |
0x05d8/0x4004 |
Minimal |
Experimental! Please report your results! |
artec_eplus48u |
|
|
Ultima 2000 |
USB |
0x05d8/0x4002 |
Good |
Works, only product id 0x4002 is supported |
gt68xx
|
|
|
USB |
0x05d8/0x4001 |
Unsupported |
Same name, but different ids: This scanner is not supported. The scanner with product id 0x4002 is supported by the gt68xx backend, however. |
unsupported
|
? |
|
|
Ultima 2000 e+ |
USB |
0x05d8/0x4002 |
Good |
Works, only limited testing until now |
gt68xx
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB Parport |
0x05cb/0x1483 |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
Link(s): http://www.avision.com, http://www.avision.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
@V5100 |
USB |
0x0638/0x0a45 |
Complete |
1 pass, 1200 dpi, A3 - duplex!, LCD screen, paper sensors |
avision
|
|
|
AM3000 Series |
USB |
0x0638/0x0a41 |
Basic |
MFD |
avision
|
|
|
AV100CS |
SCSI |
|
Untested |
|
avision
|
|
|
AV100IIICS |
SCSI |
|
Untested |
|
avision
|
|
|
AV100S |
SCSI |
|
Untested |
|
avision
|
|
|
AV120 |
USB |
0x0638/0x0a27 |
Complete |
sheetfed scanner |
avision
|
|
|
AV121 |
USB |
0x0638/0x0a3c |
Untested |
sheetfed scanner |
avision
|
|
|
AV122 |
USB |
0x0638/0x0a33 |
Good |
sheetfed duplex scanner |
avision
|
|
|
AV210 |
USB |
0x0638/0x0a25 |
Complete |
sheetfed scanner |
avision
|
|
|
AV210 |
USB |
0x0638/0x0a24 |
Complete |
sheetfed scanner |
avision
|
|
|
AV210C2 |
USB |
0x0638/0x0a3a |
Complete |
sheetfed scanner |
avision
|
|
|
AV220 |
USB |
0x0638/0x0a23 |
Complete |
duplex! sheetfed scanner |
avision
|
|
|
AV220C2 |
USB |
0x0638/0x0a2a |
Complete |
duplex! sheetfed scanner |
avision
|
|
|
AV220C2 |
USB |
0x0638/0x0a2a |
Complete |
duplex! sheetfed scanner |
avision
|
|
|
AV240SC |
SCSI |
|
Untested |
|
avision
|
|
|
AV260CS |
SCSI |
|
Untested |
|
avision
|
|
|
AV360CS |
SCSI |
|
Untested |
|
avision
|
|
|
AV363CS |
SCSI |
|
Untested |
|
avision
|
|
|
AV420CS |
SCSI |
|
Untested |
|
avision
|
|
|
AV600U |
USB |
0x0638/0x0a13 |
Good |
1 pass, 600 dpi |
avision
|
|
|
AV600U Plus |
USB |
0x0638/0x0a18 |
Untested |
1 pass, ??? dpi |
avision
|
|
|
AV610 |
USB |
0x0638/0x0a19 |
Good |
|
avision
|
|
|
AV620CS |
SCSI |
|
Complete |
1 pass, 600 dpi |
avision
|
|
|
AV620CS Plus |
SCSI |
|
Complete |
1 pass, 1200 dpi |
avision
|
|
|
AV630CS |
SCSI |
|
Complete |
1 pass, 1200 dpi - regularly tested |
avision
|
|
|
AV630CSL |
SCSI |
|
Untested |
1 pass, 1200 dpi |
avision
|
|
|
AV660S |
SCSI |
|
Untested |
1 pass, ??? dpi |
avision
|
|
|
AV680S |
SCSI |
|
Untested |
1 pass, ??? dpi |
avision
|
|
|
AV690U |
SCSI |
|
Untested |
1 pass, 2400 dpi |
avision
|
|
|
AV800S |
SCSI |
|
Untested |
1 pass, ??? dpi |
avision
|
|
|
AV810C |
SCSI |
|
Untested |
1 pass, ??? dpi |
avision
|
|
|
AV820 |
SCSI |
|
Untested |
1 pass, ??? dpi |
avision
|
|
|
AV820C |
SCSI |
|
Complete |
1 pass, ??? dpi |
avision
|
|
|
AV820C Plus |
SCSI |
|
Complete |
1 pass, ??? dpi |
avision
|
|
|
AV830C |
SCSI |
|
Untested |
1 pass, ??? dpi |
avision
|
|
|
AV830C Plus |
SCSI |
|
Untested |
1 pass, ??? dpi |
avision
|
|
|
AV880 |
SCSI |
|
Untested |
1 pass, ??? dpi |
avision
|
|
|
AV880C |
SCSI |
|
Untested |
1 pass, ??? dpi |
avision
|
|
|
AV3200C |
SCSI |
|
Complete |
1 pass, ??? dpi |
avision
|
|
|
AV3800C |
SCSI |
|
Complete |
1 pass, ??? dpi |
avision
|
|
|
AV3850SU |
USB |
0x0638/0x0a66 |
Complete |
1 pass, ??? dpi |
avision
|
|
|
AV6120 |
SCSI |
|
Untested |
|
avision
|
|
|
AV6240 |
SCSI |
|
Complete |
1 pass, ??? dpi |
avision
|
|
|
AV8000S |
SCSI |
|
Complete |
1 pass, 1200 dpi, A3 - regularly tested |
avision
|
|
|
AV8300 |
USB |
0x0638/0x0a40 |
Complete |
1 pass, 1200 dpi, A3 - duplex! |
avision
|
|
|
AV8350 |
USB |
0x0638/0x0a68 |
Complete |
1 pass, 1200 dpi, A3 - duplex! |
avision
|
|
|
AVA3 |
SCSI |
|
Basic |
1 pass, 600 dpi, A3 |
avision
|
|
|
DS310F |
Parport |
|
Unsupported |
Probably not supported. Scanner/printer/copier combination. |
unsupported
|
? |
|
DS610CU Scancopier |
USB |
0x0638/0x0a16 |
Good |
1 pass, 600 dpi, A4 |
avision
|
|
|
FB6000E |
SCSI |
|
Complete |
1 pass, 1200 dpi, A3 - duplex! - zero edge! |
avision
|
|
|
IT8300 |
USB |
0x0638/0x0a61 |
Good |
1 pass, 1200 dpi, A3 - duplex!, LCD screen, paper sensors |
avision
|
|
|
USB |
0x0638/0x0a10 |
Unsupported |
GL646 based, to be added to genesys backend. Same as UMAX Astra 4500. |
unsupported
|
? |
|
|
USB |
0x0638/0x0a20 |
Unsupported |
GL646/GL660 based. Same as UMAX Astra 4700. |
unsupported
|
? |
|
|
iVina FB2400 |
USB |
|
Unsupported |
Not supported. No chipset information available. Same as UMAX Astra 6700. |
unsupported
|
? |
Link(s): http://www.bhscanners.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
COPISCAN II 2135 |
SCSI |
|
Untested |
Simplex Scanner |
bh
|
|
|
COPISCAN II 2137(A) |
SCSI |
|
Good |
Simplex Scanner (with ACE) - limited testing |
bh
|
|
|
COPISCAN II 2138A |
SCSI |
|
Untested |
Simplex Scanner with ACE |
bh
|
|
|
COPISCAN II 3238 |
SCSI |
|
Untested |
Simplex Scanner |
bh
|
|
|
COPISCAN II 3338(A) |
SCSI |
|
Untested |
Simplex Scanner (with ACE) |
bh
|
|
|
COPISCAN II 6338 |
SCSI |
|
Good |
Duplex Scanner with ACE - development model |
bh
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
2000F |
SCSI |
|
Basic |
1 pass, ??? dpi, A4 |
avision
|
Link(s): http://www.benq.com
Comment:
Formerly Acer Peripherals
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
300f |
SCSI |
|
Good |
|
SnapScan
|
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
310s |
SCSI |
|
Good |
|
SnapScan
|
|
|
310U |
USB |
0x04a5/0x1a20 |
Good |
|
SnapScan
|
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
320U |
USB |
0x04a5/0x2022 |
Good |
|
SnapScan
|
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
340U |
USB |
0x04a5/0x2022 |
Good |
|
SnapScan
|
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
610plus |
SCSI |
|
Good |
|
SnapScan
|
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
610s |
SCSI |
|
Good |
|
SnapScan
|
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
620s |
SCSI |
|
Good |
|
SnapScan
|
|
|
620U |
USB |
0x04a5/0x1a2a |
Good |
Optional tranparency unit supported |
SnapScan
|
|
|
620UT |
USB |
0x04a5/0x2040 |
Good |
Optional tranparency unit supported |
SnapScan
|
|
|
640BT |
USB |
0x04a5/0x20be |
Good |
Optional tranparency unit supported |
SnapScan
|
|
|
640bu |
USB |
0x04a5/0x207e |
Good |
|
SnapScan
|
|
|
Parport |
|
Unsupported |
Unsupported, see link for details. |
unsupported
|
? |
|
|
640U |
USB |
0x04a5/0x2060 |
Good |
Optional tranparency unit supported |
SnapScan
|
|
|
1240 |
USB |
0x04a5/0x20c0 |
Good |
Optional tranparency unit supported |
SnapScan
|
|
|
3300 |
USB |
0x04a5/0x20de |
Good |
|
SnapScan
|
|
|
3300 |
USB |
0x04a5/0x20b0 |
Good |
|
SnapScan
|
|
|
4300 |
USB |
0x04a5/0x20de |
Good |
|
SnapScan
|
|
|
4300 |
USB |
0x04a5/0x20b0 |
Good |
|
SnapScan
|
|
|
5000 |
USB |
0x04a5/0x20f8 |
Good |
USB ID 0x04a5,0x20f8: Color / grayscale scans working up to 1200 DPI |
SnapScan
|
|
|
5000E |
USB |
0x04a5/0x20fc |
Basic |
Same as 5000U, working up to 600 DPI |
SnapScan
|
|
|
5000U |
USB |
0x04a5/0x20fc |
Basic |
Same as 5000E, working up to 600 DPI |
SnapScan
|
|
|
5150 |
USB |
0x04a5/0x2137 |
Basic |
Calibration algorithm unknown |
SnapScan
|
|
|
5250 |
USB |
0x04a5/0x2137 |
Basic |
Same hardware as 5150 (?), Calibration algorithm unknown |
SnapScan
|
|
|
5300 |
USB |
0x04a5/0x20fe |
Basic |
Problems with firmware upload reported |
SnapScan
|
|
|
USB |
0x04a5/0x2202 |
Unsupported |
|
unsupported
|
? |
Link(s): http://www.blackwidow.co.uk/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
BW4800SP |
SCSI |
|
Complete |
rebadged Artec AT3 |
artec
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Parport USB |
0x05cb/0x1483 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
Sm@rtScan Slim Edition |
USB |
0x05d8/0x4002 |
Good |
Similar to Artec Ultima 2000 |
gt68xx
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
BrighScan OpticPro |
Parport (SPP, EPP) |
|
Complete |
Reported as P12 |
plustek_pp
|
Link(s): http://www.brother.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Parport |
|
Unsupported |
The parport 200x400dpi grayscale version of this scanner is unsupported. Dmitri Katchalov did some investigations on this scanner. If you want to write a backend, contact him (see link). |
unsupported
|
? |
|
|
Parport USB |
0x04f9/0x0106 |
Unsupported |
|
unsupported
|
? |
|
|
USB |
0x04f9/0x0101 |
Unsupported |
|
unsupported
|
? |
Link(s): http://www.c-channel.ch/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
MoneyPen II |
USB |
|
Unsupported |
Probably unsupported. |
unsupported
|
? |
|
USB |
|
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
Link(s): http://www.canon.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
CanoScan 300 |
SCSI |
|
Good |
1 pass; flatbed scanner |
canon
|
|
|
CanoScan 600 |
SCSI |
|
Good |
1 pass; flatbed scanner |
canon
|
|
|
CanoScan 620S |
SCSI |
|
Good |
1 pass; flatbed scanner |
canon
|
|
|
CanoScan 1200S |
SCSI |
|
Good |
1 pass; flatbed scanner |
canon
|
|
|
CanoScan 2700F |
SCSI |
|
Good |
1 pass; film scanner |
canon
|
|
|
CanoScan 2710S |
SCSI |
|
Good |
1 pass; 36bit film scanner |
canon
|
|
|
USB |
0x04a9/0x2215 |
Unsupported |
GL660+GL646 based. |
unsupported
|
? |
|
|
USB |
0x04a9/0x2215 |
Unsupported |
GL660+GL646 based. |
unsupported
|
? |
|
|
USB |
0x04a9/0x2215 |
Unsupported |
GL660+GL646 based. |
unsupported
|
? |
|
|
USB |
0x04a9/0x221b |
Unsupported |
Probably unsupported. See link. |
unsupported
|
? |
|
|
USB |
0x04a9/0x2212 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x04a9/0x2217 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x04a9/0x220f |
Unsupported |
Not supported. See link for more information. With transparency adapter. |
unsupported
|
? |
|
|
USB |
0x04a9/0x221e |
Unsupported |
GL841 based, to be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x04a9/0x2210 |
Unsupported |
Probably unsupported, similar to 8000F. 3200x6400 dpi USB2. With transparency adapter. |
unsupported
|
? |
|
|
USB |
0x04a9/0x2219 |
Unsupported |
Probably unsupported. |
unsupported
|
? |
|
|
USB |
0x04a9/0x220b |
Unsupported |
Probably not supported. See link for more information and test program. |
unsupported
|
? |
|
|
USB |
0x04a9/0x220b |
Unsupported |
Probably not supported. See D646. |
unsupported
|
? |
|
|
CanoScan D660U |
USB |
0x04a9/0x2208 |
Good |
TPA scans not perfect |
plustek
|
|
|
USB |
0x04a9/0x220c |
Unsupported |
Not supported. However, someone started working on this scanner and some information is available (see link). |
unsupported
|
? |
|
|
USB |
0x04a9/0x220a |
Unsupported |
Not supported. See link. |
unsupported
|
? |
|
|
CanoScan FB310P |
Parport (ECP) |
|
Unsupported |
Rebadged Avision, different command set |
canon_pp
|
|
|
CanoScan FB320P |
Parport (ECP) |
|
Basic |
Newly added support |
canon_pp
|
|
|
CanoScan FB320U |
USB |
0x04a9/0x2201 |
Unsupported |
Probably not supported. No details known. |
unsupported
|
? |
|
CanoScan FB330P |
Parport (ECP) |
|
Good |
|
canon_pp
|
|
|
CanoScan FB610P |
Parport (ECP) |
|
Unsupported |
Rebadged Avision, different command set |
canon_pp
|
|
|
CanoScan FB620P |
Parport (ECP) |
|
Basic |
Newly added support |
canon_pp
|
|
|
USB |
0x04a9/0x2202 |
Unsupported |
Probably not supported. Some information is available. |
unsupported
|
? |
|
|
CanoScan FB630P |
Parport (ECP) |
|
Good |
|
canon_pp
|
|
|
CanoScan fb630u |
USB |
0x04a9/0x2204 |
Good |
OK |
canon630u
|
|
|
CanoScan fb636u |
USB |
0x04a9/0x2204 |
Good |
OK |
canon630u
|
|
|
USB |
0x04a9/0x2205 |
Unsupported |
Not supported. However, a stand-alone program for FreeBSD is available. |
unsupported
|
? |
|
|
CanoScan LiDE 35 |
USB |
0x04a9/0x2213 |
Good |
Same ids as LiDE 50. |
genesys
|
|
|
CanoScan LiDE 40 |
USB |
0x04a9/0x2213 |
Untested |
Same ids as LiDE 50. Please tell us if this scanner works. |
genesys
|
|
|
CanoScan LiDE 50 |
USB |
0x04a9/0x2213 |
Good |
|
genesys
|
|
|
CanoScan LiDE 60 |
USB |
0x04a9/0x221c |
Good |
|
genesys
|
|
|
USB |
0x04a9/0x2214 |
Unsupported |
GL841 based, to be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x04a9/0x221f |
Unsupported |
GL841 based, to be added to genesys backend |
unsupported
|
? |
|
|
CanoScan LiDE25 |
USB |
0x04a9/0x2220 |
Good |
|
plustek
|
|
|
CanoScan N340P |
Parport (ECP) |
|
Good |
|
canon_pp
|
|
|
CanoScan N640P |
Parport (ECP) |
|
Good |
|
canon_pp
|
|
|
CanoScan N640P ex |
Parport (ECP) |
|
Good |
Just an N640P in a different box? |
canon_pp
|
|
|
CanoScan N650U/N656U |
USB |
0x04a9/0x2206 |
Complete |
|
plustek
|
|
|
CanoScan N670U/N676U/LiDE20 |
USB |
0x04a9/0x220d |
Complete |
|
plustek
|
|
|
CanoScan N1220U |
USB |
0x04a9/0x2207 |
Complete |
|
plustek
|
|
|
CanoScan N1240U/LiDE30 |
USB |
0x04a9/0x220e |
Complete |
|
plustek
|
|
|
USB SCSI |
0x04a9/0x1601 |
Unsupported |
Probably not supported. Pass-trough (ADF) scanner. |
unsupported
|
? |
|
|
DR-3020C |
SCSI |
|
Unsupported |
Not supported. High-speed pass-trough (ADF) scanner. |
unsupported
|
? |
|
DR-3060 |
SCSI |
|
Unsupported |
Probably not supported. High-speed pass-trough (ADF) scanner. |
unsupported
|
? |
|
DR-3080C |
SCSI |
|
Unsupported |
Probably not supported. High-speed pass-trough (ADF) color scanner. |
unsupported
|
? |
|
USB SCSI |
0x04a9/0x1607 |
Unsupported |
Probably not supported. High-speed pass-trough (ADF) scanner. |
unsupported
|
? |
|
|
DR-9080C |
SCSI |
|
Unsupported |
Probably not supported. High-speed pass-trough (ADF) color scanner. Similar to DR-6080C, but can scan in color. |
unsupported
|
? |
|
USB SCSI |
0x04a9/0x3042 |
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
|
|
USB |
|
Unsupported |
Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
|
? |
|
|
Parport |
|
Unsupported |
Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
|
? |
|
|
USB |
0x04a9/0x105d |
Unsupported |
Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
|
? |
|
|
USB |
|
Unsupported |
Probably not supported. Scanner cardridge for Canon inkjet printers. |
unsupported
|
? |
|
|
MultiPASS MP700 |
USB |
0x04a9/0x2630 |
Minimal |
No grayscale. Same model as SmartBase MP700 Photo? |
pixma
|
|
|
MultiPASS MP730 |
USB |
0x04a9/0x262f |
Minimal |
Experimental. No grayscale. Same model as SmartBase MP730 Photo? |
pixma
|
|
|
USB |
0x04a9/0x1700 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x04a9/0x1701 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
PIXMA MP150 |
USB |
0x04a9/0x1709 |
Good |
|
pixma
|
|
|
PIXMA MP170 |
USB |
0x04a9/0x170a |
Good |
|
pixma
|
|
|
PIXMA MP450 |
USB |
0x04a9/0x170b |
Good |
Scanner makes loud noise at 600 DPI. |
pixma
|
|
|
PIXMA MP500 |
USB |
0x04a9/0x170c |
Good |
|
pixma
|
|
|
PIXMA MP750 |
USB |
0x04a9/0x1706 |
Minimal |
No grayscale. Canceling scan in ADF mode doesn't eject the paper! |
pixma
|
|
|
PIXMA MP760 |
USB |
0x04a9/0x1708 |
Minimal |
Experimental. No grayscale. The scanner sometimes hangs! |
pixma
|
|
|
PIXMA MP780 |
USB |
0x04a9/0x1707 |
Minimal |
Experimental. No grayscale. The scanner sometimes hangs! |
pixma
|
|
|
PIXMA MP800 |
USB |
0x04a9/0x170d |
Basic |
No film scan. |
pixma
|
|
|
PIXMA MP830 |
USB |
0x04a9/0x1713 |
Basic |
Please report if ADF works. |
pixma
|
|
|
USB |
0x04a9/0x263c |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Parport Serial Port |
|
Unsupported |
Unsupported at the moment, but a backend is in preparation. See link. |
unsupported
|
? |
Link(s): http://www.compaq.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
S4-100 |
USB |
0x049f/0x001a |
Complete |
Identical to UMAX 3400 |
plustek
|
|
|
S200 |
USB |
0x049f/0x0021 |
Unsupported |
Not supported. 2400x1200 dpi. One bulk-in, one bulk-out and one interrupt endpoint. Type-number: U0001-HB21, another type nr on the inside: 75100512-00 |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Parport USB |
0x05cb/0x1483 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
Link(s): http://www.cardscan.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x08f0/0x0001 |
Unsupported |
Probably not supported. Businesscard reader. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
9352 |
Parport (EPP) |
|
Good |
300 dpi CCD scanner |
mustek_pp
|
Link(s): http://www.dell.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x413c/0x5109 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
1600n |
Ethernet USB |
0x413c/0x5250 |
Basic |
Supports single page scans over ethernet |
dell1600n_net |
? |
|
USB |
0x413c/0x5105 |
Unsupported |
Not supported by stable SANE, but a backend is available in experimental CVS. See link. |
unsupported
|
? |
|
|
USB |
0x413c/0x5107 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
Link(s): http://www.blackwidow.co.uk/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
9630S |
SCSI |
|
Untested |
|
pie
|
|
|
9636PRO |
SCSI |
|
Good |
|
pie
|
|
|
9636S |
SCSI |
|
Untested |
|
pie
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
DF-600P |
SCSI |
|
Good |
sub model VM3510 |
teco1
|
|
|
DF-1200T+ |
SCSI |
|
Untested |
sub model VM3530+ |
teco1
|
|
|
DF-4830T |
SCSI |
|
Untested |
sub model VM4542 |
teco1
|
|
|
DF-9624 |
SCSI |
|
Untested |
sub model VM6530+ |
teco1
|
Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
j-6121 |
Parport |
|
Unsupported |
Probably unsupported. Sold 1998. Same as E-Lux j-6121. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
KTX-9600US |
SCSI |
|
Untested |
no feedback |
umax
|
Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
j-6121 |
Parport |
|
Unsupported |
Probably unsupported. Sold 1998. Same as E-Lux j-6121. |
unsupported
|
? |
|
M-3630 A |
Parport |
|
Unsupported |
Probably unsupported. |
unsupported
|
? |
Link(s): http://www.epson.com/, http://www.epson.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Actionscanner II |
SCSI Parport |
|
Good |
US version of GT-5000 |
epson
|
|
|
AcuLaser CX11 |
USB |
0x04b8/0x0815 |
Good |
|
epson
|
|
|
AcuLaser CX11NF |
USB |
0x04b8/0x0815 |
Good |
|
epson
|
|
|
CX-3200 |
USB |
0x04b8/0x0802 |
Good |
|
epson
|
|
|
CX-3600 |
USB |
0x04b8/0x080e |
Good |
|
epson
|
|
|
CX-3650 |
USB |
0x04b8/0x080e |
Good |
|
epson
|
|
|
CX-3700 |
USB |
0x04b8/0x0818 |
Good |
|
epson
|
|
|
CX-3800 |
USB |
0x04b8/0x0818 |
Good |
|
epson
|
|
|
CX-4200 |
USB |
0x04b8/0x0820 |
Good |
|
epson
|
|
|
CX-4600 |
USB |
0x04b8/0x080d |
Good |
|
epson
|
|
|
CX-4800 |
USB |
0x04b8/0x0819 |
Good |
|
epson
|
|
|
CX-5200 |
USB |
0x04b8/0x0801 |
Good |
|
epson
|
|
|
CX-5400 |
USB |
0x04b8/0x0808 |
Good |
|
epson
|
|
|
CX-5400 |
USB |
0x04b8/0x0801 |
Good |
|
epson
|
|
|
CX-6400 |
USB |
0x04b8/0x0805 |
Good |
|
epson
|
|
|
CX-6600 |
USB |
0x04b8/0x0805 |
Good |
|
epson
|
|
|
DX-3800 |
USB |
0x04b8/0x0818 |
Good |
|
epson
|
|
|
DX-3850 |
USB |
|
Good |
|
epson
|
|
|
ES-300C |
SCSI Parport |
|
Good |
US version of GT-6000 |
epson
|
|
|
ES-300GS |
SCSI |
|
Good |
|
epson
|
|
|
ES-600C |
Parport |
|
Good |
US version of GT-6500 |
epson
|
|
|
ES-1200C |
Parport |
|
Good |
US version of GT-9000 |
epson
|
|
|
ES-8500 |
SCSI |
|
Good |
|
epson
|
|
|
Expression 636 |
SCSI |
|
Complete |
US version of GT-9500 |
epson
|
|
|
Expression 800 |
SCSI |
|
Complete |
|
epson
|
|
|
Expression 1600 |
SCSI USB IEEE-1394 |
0x04b8/0x0107 |
Complete |
|
epson
|
|
|
Expression 1680 |
SCSI USB IEEE-1394 |
0x04b8/0x010e |
Complete |
|
epson
|
|
|
SCSI |
|
Unsupported |
A better backend for the FilmScan 200 can be found at http://www.vjet.demon.co.uk/scanner/ |
epson
|
||
|
GT-2200 |
USB |
0x04b8/0x0102 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
GT-5000 |
SCSI Parport |
|
Good |
|
epson
|
|
|
GT-5500 |
SCSI |
|
Good |
|
epson
|
|
|
GT-6000 |
SCSI Parport |
|
Good |
|
epson
|
|
|
GT-6500 |
Parport |
|
Good |
|
epson
|
|
|
GT-7000 |
SCSI |
|
Good |
|
epson
|
|
|
GT-8000 |
SCSI |
|
Good |
|
epson
|
|
|
Perfection 600 |
SCSI |
|
Good |
OK, SCSI-ID=EPSON Perfection600 |
umax
|
|
|
Perfection 610 |
USB |
0x04b8/0x0103 |
Complete |
|
epson
|
|
|
Perfection 636S |
SCSI |
|
Complete |
US version of GT-7000 |
epson
|
|
|
Perfection 636U |
USB |
0x04b8/0x0101 |
Complete |
|
epson
|
|
|
Perfection 640 |
USB |
0x04b8/0x010c |
Complete |
|
epson
|
|
|
Perfection 660 |
USB |
0x04b8/0x0114 |
Good |
|
SnapScan
|
|
|
Perfection 1200Photo |
USB |
0x04b8/0x0104 |
Complete |
with TPU |
epson
|
|
|
Perfection 1200S |
SCSI |
|
Complete |
|
epson
|
|
|
Perfection 1200U |
USB |
0x04b8/0x0104 |
Complete |
|
epson
|
|
|
Perfection 1240 |
SCSI USB |
0x04b8/0x010b |
Complete |
|
epson
|
|
|
Perfection 1250 |
USB |
0x04b8/0x010f |
Complete |
|
plustek
|
|
|
Perfection 1250Photo |
USB |
0x04b8/0x010f |
Good |
TPA scans not perfect |
plustek
|
|
|
Perfection 1260 |
USB |
0x04b8/0x011d |
Complete |
|
plustek
|
|
|
Perfection 1260Photo |
USB |
0x04b8/0x011d |
Good |
TPA scans not perfect |
plustek
|
|
|
Perfection 1270 |
USB |
0x04b8/0x0120 |
Good |
|
SnapScan
|
|
|
Perfection 1640 |
SCSI USB |
0x04b8/0x010a |
Complete |
|
epson
|
|
|
Perfection 1650 |
USB |
0x04b8/0x0110 |
Complete |
|
epson
|
|
|
Perfection 1660 |
USB |
0x04b8/0x011e |
Complete |
|
epson
|
|
|
Perfection 1670 |
USB |
0x04b8/0x011f |
Good |
|
SnapScan
|
|
|
Perfection 2400 |
USB |
0x04b8/0x011b |
Complete |
|
epson
|
|
|
Perfection 2450 |
USB IEEE-1394 |
0x04b8/0x0112 |
Complete |
|
epson
|
|
|
Perfection 2480 |
USB |
0x04b8/0x0121 |
Good |
|
SnapScan
|
|
|
Perfection 2580 |
USB |
0x04b8/0x0121 |
Basic |
Film scanning unit unsupported |
SnapScan
|
|
|
Perfection 3200 |
USB |
0x04b8/0x011c |
Complete |
US version of the GT-9800 |
epson
|
|
|
Perfection 3490 |
USB |
0x04b8/0x0122 |
Good |
|
SnapScan
|
|
|
Perfection 3590 |
USB |
0x04b8/0x0122 |
Basic |
Film scanning unit unsupported |
SnapScan
|
|
|
Perfection 4870 |
USB |
0x04b8/0x0128 |
Complete |
US version of the GT-9800 |
epson
|
|
|
Perfection 4990 |
USB |
0x04b8/0x012a |
Complete |
US version of the GT-X800 |
epson
|
|
|
RX-425 |
USB |
0x04b8/0x080f |
Good |
|
epson
|
|
|
RX-500 |
USB |
0x04b8/0x0807 |
Good |
|
epson
|
|
|
RX-600 |
USB |
0x04b8/0x0806 |
Good |
|
epson
|
|
|
Stylus CX-1500 |
USB |
0x04b8/0x080c |
Good |
|
SnapScan
|
|
|
Stylus CX-5800 |
USB |
|
Unsupported |
Probably unsupported at the moment. Not compatible to snapscan backend. It's not known if it may work with epson or epkowa backend. |
unsupported
|
? |
|
StylusScan 2000 |
USB |
0x04b8/0x0105 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Image Scanner 256 |
SCSI |
|
Good |
OK, SCSI-ID=UMAX UG 80 |
umax
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Galleria 600 |
SCSI |
|
Untested |
untested, SCSI-ID=ESCORT Galleria 600S |
umax
|
Link(s): http://www.fujitsu.com, http://www.fujitsu.com/, http://www.fcpa.fujitsu.com/products/scanners/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
1200CUS |
USB |
0x05d8/0x4002 |
Basic |
Works, but is slow. Probably a Mustek BearPaw 2400 CU clone. |
gt68xx
|
|
|
fi-60F |
USB |
|
Untested |
workgroup, current, unknown chipset, perhaps non-fujitsu |
fujitsu
|
|
|
fi-4010C |
USB |
0x04c5/0x1029 |
Unsupported |
Unsupported. Unknown chipset. |
unsupported
|
? |
|
fi-4010C |
USB |
|
Untested |
workgroup, newer, discontinued, unknown chipset, perhaps non-fujitsu |
fujitsu
|
|
|
fi-4010CU |
USB |
0x04c5/0x1029 |
Untested |
|
avision
|
|
|
fi-4110CU |
USB |
0x04c5/0x1033 |
Untested |
workgroup, newer, discontinued, unknown chipset, perhaps non-fujitsu |
fujitsu
|
|
|
fi-4110EOX |
USB |
|
Untested |
workgroup, newer, discontinued, unknown chipset, perhaps non-fujitsu |
fujitsu
|
|
|
fi-4110EOX2 |
USB |
|
Unsupported |
Uses ma1509 chip, but very different from other scanners supported by the ma1509 backend |
unsupported
|
? |
|
fi-4110EOX2 |
USB |
|
Unsupported |
workgroup, newer, discontinued, MA1509 chipset, non-fujitsu |
fujitsu
|
|
|
fi-4120C |
SCSI USB |
0x04c5/0x1041 |
Good |
workgroup, newer, discontinued |
fujitsu
|
|
|
fi-4120C2 |
SCSI USB |
0x04c5/0x10ae |
Good |
workgroup, newer, discontinued |
fujitsu
|
|
|
fi-4220C |
SCSI USB |
0x04c5/0x1042 |
Good |
workgroup, newer, discontinued |
fujitsu
|
|
|
fi-4220C2 |
SCSI USB |
0x04c5/0x10af |
Good |
workgroup, newer, discontinued |
fujitsu
|
|
|
fi-4340C |
SCSI USB |
|
Basic |
departmental, current |
fujitsu
|
|
|
fi-4530C |
SCSI USB |
|
Basic |
departmental, current |
fujitsu
|
|
|
fi-4640S |
SCSI |
|
Basic |
departmental, newer, discontinued |
fujitsu
|
|
|
fi-4750C |
SCSI |
|
Basic |
departmental, newer, discontinued |
fujitsu
|
|
|
fi-4750L |
SCSI |
|
Basic |
production, newer, discontinued |
fujitsu
|
|
|
fi-4860C |
SCSI |
|
Basic |
production, current |
fujitsu
|
|
|
fi-4990C |
SCSI |
|
Basic |
production, current |
fujitsu
|
|
|
fi-5110C |
USB |
0x04c5/0x1097 |
Good |
workgroup, current |
fujitsu
|
|
|
fi-5110EOX |
USB |
0x04c5/0x1096 |
Good |
workgroup, newer, discontinued, no TWAIN driver |
fujitsu
|
|
|
fi-5110EOX2 |
USB |
|
Good |
workgroup, newer, discontinued, no TWAIN driver |
fujitsu
|
|
|
fi-5110EOXM |
USB |
|
Untested |
workgroup, current, unknown chipset, perhaps same as fi-5110EOX |
fujitsu
|
|
|
fi-5120C |
SCSI USB |
0x04c5/0x10e0 |
Good |
workgroup, current |
fujitsu
|
|
|
fi-5220C |
SCSI USB |
0x04c5/0x10e1 |
Good |
workgroup, current |
fujitsu
|
|
|
fi-5530C |
SCSI USB |
|
Basic |
departmental, current |
fujitsu
|
|
|
fi-5650C |
SCSI USB |
|
Basic |
production, current |
fujitsu
|
|
|
fi-5750C |
SCSI USB |
|
Basic |
production, current |
fujitsu
|
|
|
fi-5900C |
SCSI USB |
0x04c5/0x10e7 |
Basic |
production, current |
fujitsu
|
|
|
SCSI |
|
Good |
workgroup, older, discontinued |
fujitsu
|
||
|
M3092DC |
SCSI |
|
Good |
workgroup, older, discontinued |
fujitsu
|
|
|
M3093DE |
RS232C/Video |
|
Unsupported |
departmental, older, discontinued |
fujitsu
|
|
|
M3093DG |
SCSI |
|
Basic |
departmental, older, discontinued |
fujitsu
|
|
|
M3093E |
RS232C/Video |
|
Unsupported |
departmental, older, discontinued |
fujitsu
|
|
|
M3093EX |
RS232C/Video |
|
Unsupported |
departmental, older, discontinued |
fujitsu
|
|
|
M3093GX |
SCSI |
|
Basic |
departmental, older, discontinued |
fujitsu
|
|
|
M3096EX |
RS232C/Video |
|
Unsupported |
departmental, older, discontinued |
fujitsu
|
|
|
M3096GX |
SCSI |
|
Basic |
departmental, older, discontinued |
fujitsu
|
|
|
M3097DE |
RS232C/Video |
|
Unsupported |
departmental, older, discontinued |
fujitsu
|
|
|
M3097DG |
SCSI |
|
Basic |
departmental, older, discontinued |
fujitsu
|
|
|
M3097E+ |
RS232C/Video |
|
Unsupported |
departmental, older, discontinued |
fujitsu
|
|
|
M3097G+ |
SCSI |
|
Basic |
departmental, older, discontinued |
fujitsu
|
|
|
M3099A |
RS232C/Video |
|
Unsupported |
production, older, discontinued |
fujitsu
|
|
|
M3099EH |
RS232C/Video |
|
Unsupported |
production, older, discontinued |
fujitsu
|
|
|
M3099EX |
RS232C/Video |
|
Unsupported |
production, older, discontinued |
fujitsu
|
|
|
M3099G |
SCSI |
|
Basic |
production, older, discontinued |
fujitsu
|
|
|
M3099GH |
SCSI |
|
Basic |
production, older, discontinued |
fujitsu
|
|
|
M3099GX |
SCSI |
|
Basic |
production, older, discontinued |
fujitsu
|
|
|
M4097D |
SCSI |
|
Basic |
production, older, discontinued |
fujitsu
|
|
|
M4099D |
SCSI |
|
Basic |
production, current |
fujitsu
|
|
|
S500 |
USB |
0x04c5/0x10fe |
Good |
workgroup, current, no TWAIN driver |
fujitsu
|
|
|
ScanPartner |
SCSI |
|
Untested |
|
avision
|
|
|
ScanPartner 10 |
SCSI |
|
Untested |
|
avision
|
|
|
ScanPartner 10C |
SCSI |
|
Untested |
|
avision
|
|
|
ScanPartner 15C |
SCSI |
|
Good |
|
sp15c |
|
|
ScanPartner 15C/620C |
SCSI |
|
Unsupported |
workgroup, current, non-fujitsu, avision oem |
fujitsu
|
|
|
ScanPartner 93GX |
SCSI |
|
Basic |
workgroup, older, discontinued |
fujitsu
|
|
|
ScanPartner 300C |
SCSI |
|
Untested |
|
avision
|
|
|
ScanPartner 600C |
SCSI |
|
Good |
|
sp15c |
|
|
ScanPartner 620C |
SCSI |
|
Good |
|
avision
|
|
|
ScanPartner Jr |
SCSI |
|
Untested |
|
avision
|
|
|
ScanPartner Jr/10/15/300/600 |
SCSI |
|
Unsupported |
workgroup, discontinued, non-fujitsu, avision oem |
fujitsu
|
|
|
ScanStation |
SCSI |
|
Untested |
|
avision
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
4800 |
Parport (EPP) |
|
Good |
300 dpi CCD scanner |
mustek_pp
|
Link(s): http://www.genius-kye.com/, http://www.geniusmouse.co.uk/, http://www.geniusnet.com.tw/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
SCSI |
|
Unsupported |
Probably unsupported, see link for details. |
unsupported
|
? |
|
|
ColorPage HR6 V1 |
USB |
0x0458/0x2004 |
Basic |
|
u12
|
|
|
Colorpage HR6 V2 |
USB |
0x0458/0x2008 |
Complete |
|
plustek
|
|
|
Colorpage HR6 V2 |
USB |
0x0458/0x2007 |
Complete |
|
plustek
|
|
|
Colorpage HR6A |
USB |
0x0458/0x2009 |
Untested |
|
plustek
|
|
|
Colorpage HR6X |
USB |
0x0458/0x2016 |
Untested |
|
plustek
|
|
|
Colorpage HR6X EPP |
Parport (SPP, EPP) |
|
Good |
Negative scanning does not work correctly |
plustek_pp
|
|
|
USB |
0x0458/0x2019 |
Unsupported |
GL646 based, to be added to genesys backend |
unsupported
|
? |
|
|
Colorpage HR7 |
USB |
0x0458/0x2013 |
Complete |
|
plustek
|
|
|
Colorpage HR7LE |
USB |
0x0458/0x2015 |
Untested |
|
plustek
|
|
|
USB |
0x0458/0x2018 |
Unsupported |
GL646 based, to be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x0458/0x201c |
Unsupported |
GL841 based, to be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x0458/0x201e |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
Colorpage Vivid 1200 X |
USB |
0x0458/0x201d |
Good |
|
gt68xx
|
|
|
Colorpage Vivid 1200 XE |
USB |
0x0458/0x201f |
Good |
|
gt68xx
|
|
|
ColorPage Vivid III USB |
USB |
0x07b3/0x0001 |
Untested |
Note: Device has Plustek vendor and product ID (0x07b3/0x0001) |
u12
|
|
|
Colorpage Vivid III V2 |
Parport (SPP, EPP) |
|
Complete |
Reported as PT12 |
plustek_pp
|
|
|
Colorpage Vivid Pro II Film |
Parport (SPP, EPP) |
|
Complete |
Reported as OP9636T/12000T |
plustek_pp
|
|
|
Colorpage Vivid3 V2 |
USB |
0x0458/0x2011 |
Good |
Same as Colorpage Vivid3x |
gt68xx
|
|
|
Colorpage Vivid3x |
USB |
0x0458/0x2011 |
Good |
|
gt68xx
|
|
|
Colorpage Vivid3xe |
USB |
0x0458/0x2017 |
Good |
|
gt68xx
|
|
|
Colorpage Vivid4 |
USB |
0x0458/0x2014 |
Good |
|
gt68xx
|
|
|
Colorpage Vivid4x |
USB |
0x0458/0x201b |
Good |
|
gt68xx
|
|
|
Colorpage Vivid4xe |
USB |
0x0458/0x201a |
Good |
|
gt68xx
|
|
|
ColorPage-EP |
Parport |
|
Good |
|
microtek2
|
|
|
ColorPage-HR5 (Pro) |
SCSI |
|
Good |
OK, SCSI-ID=KYE ColorPage-HR5 |
umax
|
|
|
USB |
0x0458/0x2021 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x0458/0x2020 |
Unsupported |
GL841 based, to be added to genesys backend. |
unsupported
|
? |
|
|
Colorpage-SP2 |
SCSI |
|
Good |
Same as Microtek Scanmaker E3 |
microtek
|
|
|
FS-1130 Colorpage Scanner |
SCSI |
|
Good |
|
leo
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
2000 |
USB |
0x05d8/0x4002 |
Good |
Same as Artec Ultima 2000. |
gt68xx
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Maxi Scan A4 Parallel 36 bit |
Parport |
|
Unsupported |
Probably unsupported. Identical to the Benq Prisa 620P. |
unsupported
|
? |
|
USB |
0x080d/0x0102 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
Link(s): http://www.guillemot.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Maxi A4 36 bit |
USB |
0x04a5/0x2060 |
Good |
Rebadged Benq 620U, needs Benq firmware file u96v???.bin |
SnapScan
|
|
|
Maxi Scan A4 Deluxe (SCSI) |
SCSI |
|
Good |
Rebadged SnapScan 310s. |
SnapScan
|
|
|
Maxi Scan A4 USB 640U |
USB |
0x04a5/0x2060 |
Good |
Rebadged Benq 640U. |
SnapScan
|
|
|
Scan@home Touch 1248 (USB) |
USB |
0x04a5/0x20de |
Good |
Rebadged Benq 3300. |
SnapScan
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x080d/0x0102 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
Link(s): http://www.hp.com, http://www.hp.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x03f0/0x1001 |
Unsupported |
Not supported by SANE. However, it's detected as mass storage device so just mounting it is reported to work. See link for device data. |
unsupported
|
? |
|
|
Photosmart 1200 Photo |
USB |
|
Unsupported |
Probably not supported by SANE. No details known. 10x15 cm. Maybe similar to Photo Scanner 1000? |
unsupported
|
? |
|
PhotoSmart PhotoScanner |
SCSI |
|
Complete |
|
hp
|
|
|
USB |
0x03f0/0x0102 |
Unsupported |
Not supported yet by SANE. See link for details. |
unsupported
|
? |
|
|
USB |
0x03f0/0x0102 |
Unsupported |
Not supported yet by SANE. See link for details. |
unsupported
|
? |
|
|
ScanJet 3c |
SCSI |
|
Complete |
|
hp
|
|
|
ScanJet 3p |
SCSI |
|
Complete |
|
hp
|
|
|
ScanJet 4c |
SCSI |
|
Complete |
|
hp
|
|
|
ScanJet 4p |
SCSI |
|
Complete |
|
hp
|
|
|
ScanJet 5p |
SCSI |
|
Complete |
|
hp
|
|
|
ScanJet 5s |
Parport (EPP) |
|
Minimal |
Requires libieee1284 library. Only gray mode. |
hpsj5s
|
|
|
ScanJet 2100C |
USB |
0x03f0/0x0505 |
Complete |
|
plustek
|
|
|
ScanJet 2200C |
USB |
0x03f0/0x0605 |
Complete |
|
plustek
|
|
|
ScanJet 2300C |
USB |
0x03f0/0x0901 |
Complete |
600x1200 dpi max |
genesys
|
|
|
USB |
0x03f0/0x0a01 |
Unsupported |
GL646 based, to be added to genesys backend |
unsupported
|
? |
|
|
Scanjet 3200C |
Parport (EPP/ECP) |
|
Good |
works (relabelled 1220P and 2000P) |
umax_pp
|
|
|
ScanJet 3300c |
USB |
0x03f0/0x0205 |
Complete |
|
niash
|
|
|
ScanJet 3400c |
USB |
0x03f0/0x0405 |
Complete |
If you use Linux 2.6, version 2.6.8 or newer is necessary. |
niash
|
|
|
ScanJet 3500C |
USB |
0x03f0/0x2205 |
Good |
|
hp3500
|
|
|
ScanJet 3530C |
USB |
0x03f0/0x2005 |
Good |
|
hp3500
|
|
|
ScanJet 3570C |
USB |
0x03f0/0x2005 |
Good |
|
hp3500
|
|
|
USB |
0x03f0/0x1405 |
Unsupported |
GL646 based, to be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x03f0/0x1405 |
Unsupported |
GL646 based, to be added to genesys backend |
unsupported
|
? |
|
|
ScanJet 3770 |
USB |
0x03f0/0x2505 |
Unsupported |
While an external binary-only backend exists, it works only on Linux i386. Therefore the scanner is unsupported on other platforms. |
unsupported
|
? |
|
USB |
0x03f0/0x2605 |
Unsupported |
Probably unsupported, see link for details. |
unsupported
|
? |
|
|
ScanJet 4100C |
USB |
0x03f0/0x0101 |
Complete |
|
hp
|
|
|
ScanJet 4200C |
USB |
0x03f0/0x0105 |
Basic |
8bpp color, 75/150/300/600 dpi only |
hp4200
|
|
|
ScanJet 4200Cse |
USB |
0x03f0/0x0105 |
Basic |
8bpp color, 75/150/300/600 dpi only |
hp4200
|
|
|
ScanJet 4200Cxi |
USB |
0x03f0/0x0105 |
Basic |
8bpp color, 75/150/300/600 dpi only |
hp4200
|
|
|
ScanJet 4300c |
USB |
0x03f0/0x0305 |
Complete |
If you use Linux 2.6, version 2.6.8 or newer is necessary. |
niash
|
|
|
ScanJet 4300c/Silitek |
USB |
0x047b/0x1002 |
Complete |
If you use Linux 2.6, version 2.6.8 or newer is necessary. |
niash
|
|
|
USB |
0x03f0/0x1205 |
Unsupported |
Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x03f0/0x1305 |
Unsupported |
Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x03f0/0x3005 |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x03f0/0x3005 |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x03f0/0x1b05 |
Unsupported |
GL841, maybe can be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x03f0/0x1b05 |
Unsupported |
GL843, maybe can be added to genesys backend |
unsupported
|
? |
|
|
ScanJet 5100C |
Parport |
|
Complete |
Requires ppscsi driver and epst module |
hp
|
|
|
ScanJet 5200C |
Parport USB |
0x03f0/0x0401 |
Complete |
Parallel interface requires ppscsi driver and epst module |
hp
|
|
|
ScanJet 5300C |
USB |
0x03f0/0x0701 |
Complete |
1 pass, 2400 dpi - regularly tested - some FW revisions have x-axis image scaling problems over 1200 dpi |
avision
|
|
|
ScanJet 5370C |
USB |
0x03f0/0x0701 |
Good |
1 pass, 2400 dpi - some FW revisions have x-axis image scaling problems over 1200 dpi |
avision
|
|
|
ScanJet 5400c |
USB |
0x03f0/0x1005 |
Basic |
|
hp5400
|
|
|
ScanJet 5470c |
USB |
0x03f0/0x1105 |
Basic |
|
hp5400
|
|
|
ScanJet 5490c |
USB |
|
Basic |
|
hp5400
|
|
|
USB |
0x03f0/0x1305 |
Unsupported |
Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x03f0/0x1605 |
Unsupported |
Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x03f0/0x1205 |
Unsupported |
Maybe GL841_HP, but not confirmed, maybe can be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x03f0/0x1705 |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
|
|
ScanJet 6100C |
SCSI |
|
Complete |
|
hp
|
|
|
ScanJet 6200C |
SCSI USB |
0x03f0/0x0201 |
Complete |
|
hp
|
|
|
ScanJet 6250C |
SCSI USB |
0x03f0/0x0201 |
Complete |
|
hp
|
|
|
ScanJet 6300C |
SCSI USB |
0x03f0/0x0601 |
Complete |
|
hp
|
|
|
ScanJet 6350C |
SCSI USB |
0x03f0/0x0601 |
Complete |
|
hp
|
|
|
ScanJet 6390C |
SCSI USB |
0x03f0/0x0601 |
Complete |
|
hp
|
|
|
ScanJet 7400c |
USB |
0x03f0/0x0801 |
Good |
1 pass, 2400 dpi - dual USB/SCSI interface |
avision
|
|
|
ScanJet 7450c |
USB |
0x03f0/0x0801 |
Good |
1 pass, 2400 dpi - dual USB/SCSI interface - regularly tested |
avision
|
|
|
ScanJet 7490c |
USB |
0x03f0/0x0801 |
Good |
1 pass, 1200 dpi - dual USB/SCSI interface |
avision
|
|
|
USB |
0x03f0/0x1805 |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
|
|
ScanJet 8200 |
USB |
0x03f0/0x0b01 |
Good |
1 pass, 4800 (?) dpi - USB 2.0 |
avision
|
|
|
ScanJet 8250 |
USB |
0x03f0/0x0b01 |
Good |
1 pass, 4800 (?) dpi - USB 2.0 |
avision
|
|
|
ScanJet 8290 |
USB |
0x03f0/0x0b01 |
Good |
1 pass, 4800 (?) dpi - USB 2.0 and SCSI - only SCSI tested so far |
avision
|
|
|
ScanJet IIc |
SCSI |
|
Complete |
|
hp
|
|
|
ScanJet IIcx |
SCSI |
|
Complete |
|
hp
|
|
|
ScanJet IIp |
SCSI |
|
Complete |
|
hp
|
|
|
ScanJet Plus |
Propietary |
|
Complete |
Driver for HP parallel interface card required |
hp
|
Link(s): http://www.ibm.com/, http://www.ibm.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
2456 |
SCSI |
|
Basic |
Was reported to work long time ago. Reports are welcome. |
ibm
|
|
|
ADF Color Scanner |
Proprietary |
|
Unsupported |
Unsupported. Uses proprietary ISA card. Maybe the same as the Plustek Spectra ADF? |
unsupported
|
? |
Link(s): http://www.iomagic.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB Parport |
0x05cb/0x1483 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0a53/0x1000 |
Unsupported |
Unsupported. LM9832/3. See link for details. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
1200U |
USB |
0x0638/0x0268 |
Untested |
|
avision
|
Link(s): http://www.kodak.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
i30 |
USB |
0x040a/0x6001 |
Untested |
|
avision
|
|
|
i40 |
USB |
0x040a/0x6002 |
Basic |
|
avision
|
|
|
i50 |
USB |
0x040a/0x6003 |
Untested |
|
avision
|
|
|
i60 |
USB |
0x040a/0x6004 |
Untested |
|
avision
|
|
|
i80 |
USB |
0x040a/0x6005 |
Untested |
|
avision
|
|
|
Snapshot Photo Scanner 1 |
Parport |
|
Unsupported |
Unsupported. FCC ID HWF96PHS |
unsupported
|
? |
Link(s): http://www.komodo.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
S1200 |
SCSI |
|
Untested |
rebadged Sceptre S1200 |
sceptre
|
Link(s): http://www.konicaminolta.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB IEEE-1394 |
0x0686/0x400e |
Unsupported |
Probably unsupported. May work with vuescan. See link for details. |
unsupported
|
? |
|
|
USB |
0x132b/0x0012 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
IEEE-1394 |
|
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x0686/0x400d |
Unsupported |
Unsupported. May work with vuescan. See link for details. |
unsupported
|
? |
|
|
USB |
0x132b/0x000a |
Unsupported |
Unsupported. Works with vuescan. See link for details. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
LEOScan S3 |
SCSI |
|
Good |
FCC ID LUZFS1130 |
leo
|
Link(s): http://www.lexmark.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x043d/0x0097 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x043d/0x007d |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
X70 |
USB |
0x043d/0x002d |
Good |
Works, some resolutions fail at 16 bit |
gt68xx
|
|
|
X73 |
USB |
0x043d/0x002d |
Good |
Works, some resolutions fail at 16 bit, same as X70 |
gt68xx
|
|
|
USB |
0x043d/0x0060 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x043d/0x0060 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x043d/0x0060 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x043d/0x003d |
Unsupported |
Unsupported. GL640. |
unsupported
|
? |
|
|
X1110 |
USB |
0x043d/0x007c |
Untested |
|
lexmark
|
|
|
USB |
0x043d/0x007c |
Basic |
The images scanned have a lot of vertical lines |
lexmark
|
||
|
X1140 |
USB |
0x043d/0x007c |
Untested |
|
lexmark
|
|
|
USB |
0x043d/0x007c |
Minimal |
Colors don't seem to be ok. Scanned white pages appear purple. |
lexmark
|
||
|
X1170 |
USB |
0x043d/0x007c |
Basic |
Colors aren't so bright. Bed-wide pictures are unscannable because the scan head never reaches the end of the bed (neither with letter selected). It leaves almost 2 cm out. |
lexmark
|
|
|
USB |
0x043d/0x007c |
Basic |
|
lexmark
|
||
|
X1185 |
USB |
0x043d/0x007c |
Basic |
Tested with xscanimage. Supports 75, 150, 300, 600, 1200(600x1200) dpi resolutions. Does grayscale or colour scans in the following sizes: wallet, 3x5, 4x6, 5x7, 8x10, letter. |
lexmark
|
|
|
USB |
0x043d/0x00bb |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x043d/0x0065 |
Unsupported |
Unsupported. |
unsupported
|
? |
|
|
X5150 |
USB |
|
Unsupported |
Probably unsupported. No details known. Please send output of sane-find-scanner -v -v. |
unsupported
|
? |
|
USB |
0x043d/0x0093 |
Unsupported |
Unsupported. |
unsupported
|
? |
|
|
USB |
0x043d/0x0072 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
Link(s): http://www.heidelberg.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Jade |
SCSI |
|
Good |
OK, SCSI-ID=LinoHell JADE |
umax
|
|
|
Jade |
SCSI |
|
Good |
OK, SCSI-ID=LinoHell Office |
umax
|
|
|
Jade2 |
SCSI |
|
Good |
OK, SCSI-ID=LinoHell Office2 |
umax
|
|
|
Linoscan 1400 |
SCSI |
|
Good |
OK, SCSI-ID=HDM LS4H1S |
umax
|
|
|
Opal |
SCSI |
|
Untested |
support disabled until tested - please contact author |
umax
|
|
|
Opal Ultra |
SCSI |
|
Untested |
support disabled until tested - please contact author |
umax
|
|
|
Opal2 |
SCSI |
|
Good |
OK; SCSI-ID=LinoHell OPAL2 |
umax
|
|
|
Saphir |
SCSI |
|
Untested |
support disabled until tested - please contact author |
umax
|
|
|
Saphir HiRes |
SCSI |
|
Untested |
support disabled until tested - please contact author |
umax
|
|
|
Saphir Ultra |
SCSI |
|
Untested |
support disabled until tested - please contact author |
umax
|
|
|
Saphir Ultra II |
SCSI |
|
Good |
OK, SCSI-ID=Linotype SAPHIR4 |
umax
|
|
|
Saphir2 |
SCSI |
|
Good |
OK, SCSI-ID=LinoHell SAPHIR2 |
umax
|
|
|
Saphir3 |
SCSI |
|
Good |
OK, SCSI-ID=LinoHell SAPHIR3 |
umax
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
PageScan Color |
Parport |
|
Unsupported |
Most probably unsupported. |
unsupported
|
? |
|
USB |
0x046d/0x040f |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
Link(s): http://www.medion.com,
http://www.medion.com/,
http://www.medion.de/
Comment:
Sold by Aldi and Tchibo.
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
LT 9452 |
USB |
0x05d8/0x4002 |
Good |
Similar to Mustek ScanExpress 1200 UB Plus |
gt68xx
|
|
|
MD 4394 |
USB |
0x05d8/0x4002 |
Good |
Product id 0x4002. If you have 0x4003, use artec_eplus48u backend. |
gt68xx
|
|
|
USB |
0x0461/0x037b |
Unsupported |
Probably unsupported. There seem to exist two different scanners with that name. See link for details. |
unsupported
|
? |
|
|
USB |
0x0461/0x0392 |
Unsupported |
Probably unsupported. There seem to exist two different scanners with that name. See link for details. |
unsupported
|
? |
|
|
MD 9458 |
USB |
0x05d8/0x4002 |
Good |
Similar to Artec Ultima 2000 (e+?) |
gt68xx
|
|
|
MD 9806 |
Parport (EPP) |
|
Good |
300 dpi CCD scanner |
mustek_pp
|
|
|
MD 9848 |
Parport (EPP) |
|
Good |
300 dpi CCD scanner |
mustek_pp
|
|
|
USB |
0x05da/0x3008 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x0461/0x037b |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x0461/0x037b |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x05da/0x3008 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x08ff/0x2580 |
Unsupported |
Fingerprint sensor. See link for details. |
unsupported
|
? |
|
|
USB |
0x05da/0x30e5 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x05da/0x3022 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x05da/0x3022 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
MD/LT 935x |
Parport (EPP) |
|
Good |
600x1200 dpi CIS scanner |
mustek_pp
|
|
|
MD/LT 985x |
Parport (EPP) |
|
Good |
600x1200 dpi CIS scanner |
mustek_pp
|
|
|
MD/LT 9375 |
USB |
0x05d8/0x4002 |
Untested |
Untested, but is reported to have the same ids as the Artec Ultima 2000. Please test. |
gt68xx
|
|
|
MD/LT 9385 |
USB |
0x05d8/0x4002 |
Good |
Similar to Artec Ultima 2000 |
gt68xx
|
|
|
MD/LT 9890 |
Parport (EPP) |
|
Good |
600x1200 dpi CIS scanner |
mustek_pp
|
|
|
MD4394 |
USB |
0x05d8/0x4003 |
Good |
Only scanners with product id 0x4003 will work; try the gt68xx backend, if your scanner has product id 0x4002 |
artec_eplus48u |
|
|
MD5345 |
USB |
0x0461/0x0377 |
Good |
Has a Primax USB ID |
genesys
|
|
|
MD6228 |
USB |
0x0461/0x0377 |
Good |
Has a Primax USB ID. Same as MD5345 |
genesys
|
|
|
MD6471 |
USB |
0x0461/0x0377 |
Complete |
Has a Primax USB ID. Same as MD5345 |
genesys
|
|
|
MD9693 |
USB |
0x05d8/0x4003 |
Good |
|
artec_eplus48u |
|
|
MD9705 |
USB |
0x05d8/0x4003 |
Good |
|
artec_eplus48u |
Link(s): http://www.artecusa.com/, http://www.memorex.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0461/0x0346 |
Unsupported |
Probably unsupported. |
unsupported
|
? |
|
|
USB |
0x0461/0x0347 |
Unsupported |
Probably unsupported. Same as Visioneer Onetouch 4400. See link for details. |
unsupported
|
? |
|
|
USB Parport |
0x05cb/0x1483 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
MEM 48U |
USB |
0x05d8/0x4005 |
Good |
|
artec_eplus48u |
|
|
Parport |
|
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
MM-9851 |
Parport (EPP) |
|
Good |
300x600 dpi CIS scanner |
mustek_pp
|
Link(s): http://www.microstar.de/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
MR 9791 |
USB |
0x05d8/0x4003 |
Good |
|
artec_eplus48u |
Link(s): http://www.microtek.com/
Comment:
Microtek makes a wide variety of devices.
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
ArtixScan 2020 |
SCSI |
|
Unsupported |
Unsupported. Same as Agfa DuoScan T2000XL? |
unsupported
|
? |
|
Artixscan 2500f |
SCSI IEEE-1384 |
|
Unsupported |
Unsupported. Same as Agfa DuoScan T2500? |
unsupported
|
? |
|
ArtixScan 4000tf |
USB |
|
Unsupported |
Unsupported. Uses ALI M5611B. |
unsupported
|
? |
|
Color PageWiz |
SCSI (Parport) |
|
Basic |
sheet-fed (preliminary, see mapage) |
microtek
|
|
|
USB |
0x05e3/0x0120 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
Phantom 330CX |
Parport |
|
Complete |
|
microtek2
|
|
|
Phantom 636 |
SCSI |
|
Complete |
|
microtek2
|
|
|
Phantom 636CX |
Parport |
|
Complete |
|
microtek2
|
|
|
SCSI |
|
Unsupported |
Probably unsupported. See link for more details. |
unsupported
|
? |
|
|
Scanmaker 35 |
SCSI |
|
Good |
slide-scanner |
microtek
|
|
|
Scanmaker 35t+ |
SCSI |
|
Good |
slide-scanner |
microtek
|
|
|
Scanmaker 45t |
SCSI |
|
Good |
slide-scanner |
microtek
|
|
|
ScanMaker 330 |
SCSI |
|
Basic |
|
microtek2
|
|
|
ScanMaker 336 CX |
SCSI |
|
Unsupported |
Probably unsupported. Seems to be similar to the Microtek 330 CX and is detected by the microtek2 backend. Scanning doesn't seem to work however. |
unsupported
|
? |
|
Scanmaker 600G(S) |
SCSI |
|
Basic |
gray only (see manpage) |
microtek
|
|
|
Scanmaker 600Z(S) |
SCSI |
|
Untested |
|
microtek
|
|
|
ScanMaker 630 |
SCSI |
|
Basic |
|
microtek2
|
|
|
ScanMaker 636 |
SCSI |
|
Complete |
|
microtek2
|
|
|
SCSI |
|
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
ScanMaker 3600 |
USB |
0x05da/0x40ff |
Basic |
works |
sm3600
|
|
|
ScanMaker 3600 |
USB |
0x05da/0x40ca |
Basic |
works |
sm3600
|
|
|
ScanMaker 3600 |
USB |
0x05da/0x40b3 |
Basic |
works |
sm3600
|
|
|
USB |
0x0461/0x0347 |
Unsupported |
Unsupported. Doesn't seem to be compatible to 3600 series, see link. |
unsupported
|
? |
|
|
ScanMaker 3700 |
USB |
0x05da/0x40cb |
Basic |
works |
sm3600
|
|
|
ScanMaker 3700 |
USB |
0x05da/0x40b8 |
Basic |
works |
sm3600
|
|
|
ScanMaker 3750 |
USB |
0x05da/0x40dd |
Basic |
works (told) |
sm3600
|
|
|
USB |
0x05da/0x30ce |
Unsupported |
Unsupported. See link for more details. |
unsupported
|
? |
|
|
USB |
0x05da/0x30ce |
Unsupported |
Unsupported. See link for more details. |
unsupported
|
? |
|
|
ScanMaker 3840 |
USB |
0x05da/0x30d4 |
Good |
8 and 16 bit, color and grayscale |
sm3840
|
|
|
USB |
0x05da/0x3021 |
Unsupported |
Unsupported. SQ113 chip. See link for more details. |
unsupported
|
? |
|
|
USB |
0x05da/0x40c7 |
Unsupported |
Unsupported. See link for more details. |
unsupported
|
? |
|
|
USB |
0x05da/0x20b4 |
Unsupported |
Unsupported. See link for more details. |
unsupported
|
? |
|
|
ScanMaker 4800 |
USB |
0x05da/0x30cf |
Good |
Same hardware as SM3840, different color box |
sm3840
|
|
|
USB |
0x05da/0x30b9 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x05da/0x3008 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x05da/0x30b9 |
Unsupported |
Unsupported. See link for more details. |
unsupported
|
? |
|
|
USB |
0x05da/0x20a7 |
Unsupported |
Unsupported. See link for more details. |
unsupported
|
? |
|
|
ScanMaker 5700 |
USB |
0x05da/0x20bd |
Unsupported |
Unsupported. Uses ALI M5615 like the ScanMaker 4700. |
unsupported
|
? |
|
USB |
0x05da/0x30d8 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x05da/0x30d8 |
Unsupported |
Unsupported. See link for more details. |
unsupported
|
? |
|
|
USB |
0x05da/0x30e5 |
Unsupported |
Unsupported. See link for more details. |
unsupported
|
? |
|
|
USB |
0x05da/0x30e5 |
Unsupported |
Unsupported. See link for more details. |
unsupported
|
? |
|
|
USB IEEE-1394 |
0x05da/0x20c9 |
Unsupported |
Unsupported. See link. |
unsupported
|
? |
|
|
USB IEEE-1394 |
0x05da/0x20b1 |
Unsupported |
Unsupported. See link for details. USB vendor and product ids to be checked. |
unsupported
|
? |
|
|
ScanMaker 9600XL |
USB IEEE-1394 |
0x05da/0x20de |
Unsupported |
Probably unsupported. SCSI seems to work with microtek2 backend. |
unsupported
|
? |
|
ScanMaker 9600XL |
SCSI |
|
Good |
only flatbed mode ? |
microtek2
|
|
|
USB SCSI |
0x05da/0x20de |
Unsupported |
Partly unsupported. IEEE-1394 works with microtek2 backend. See link. |
unsupported
|
? |
|
|
IEEE-1394 |
|
Minimal |
IEEE-1394 seems to work. See link. More reports welcome. |
microtek2
|
||
|
Scanmaker E2 |
SCSI |
|
Good |
3-pass |
microtek
|
|
|
Scanmaker E3 |
SCSI |
|
Good |
|
microtek
|
|
|
ScanMaker E3plus |
SCSI |
|
Complete |
|
microtek2
|
|
|
ScanMaker E3plus |
Parport |
|
Complete |
|
microtek2
|
|
|
Scanmaker E6 |
SCSI |
|
Good |
|
microtek
|
|
|
USB |
0x05da/0x30e6 |
Unsupported |
Unsupported. See link. |
unsupported
|
? |
|
|
Scanmaker II |
SCSI |
|
Good |
3-pass |
microtek
|
|
|
Scanmaker IIG |
SCSI |
|
Good |
gray only |
microtek
|
|
|
Scanmaker IIHR |
SCSI |
|
Good |
3-pass |
microtek
|
|
|
Scanmaker III |
SCSI |
|
Good |
|
microtek
|
|
|
Scanmaker IISP |
SCSI |
|
Good |
|
microtek
|
|
|
USB |
0x05da/0x201c |
Unsupported |
Unsupported. See link. |
unsupported
|
? |
|
|
ScanMaker V6UPL |
USB |
0x05da/0x00b6 |
Basic |
Sometimes scan speed goes to fast and results look badly smudged. |
microtek2
|
|
|
ScanMaker V6USL |
USB |
0x05da/0x80a3 |
Complete |
|
microtek2
|
|
|
ScanMaker V6USL |
USB |
0x05da/0x00a3 |
Complete |
|
microtek2
|
|
|
ScanMaker V6USL |
SCSI |
|
Complete |
|
microtek2
|
|
|
ScanMaker V300 |
Parport |
|
Good |
|
microtek2
|
|
|
ScanMaker V300 |
SCSI |
|
Good |
|
microtek2
|
|
|
ScanMaker V310 |
Parport |
|
Basic |
|
microtek2
|
|
|
ScanMaker V310 |
SCSI |
|
Basic |
|
microtek2
|
|
|
ScanMaker V600 |
Parport |
|
Basic |
|
microtek2
|
|
|
ScanMaker V600 |
SCSI |
|
Basic |
|
microtek2
|
|
|
ScanMaker X6 |
SCSI |
|
Complete |
|
microtek2
|
|
|
ScanMaker X6EL |
SCSI |
|
Basic |
|
microtek2
|
|
|
ScanMaker X6USB |
USB |
0x05da/0x0099 |
Good |
|
microtek2
|
|
|
ScanMaker X12USL |
SCSI |
|
Good |
only Flatbed mode ? |
microtek2
|
|
|
USB |
0x04a7/0x0224 |
Unsupported |
Unsupported. Vendor/Product ids: 0x04a7/0x0224. Realtek RTS8801B?. See link for details. |
unsupported
|
? |
|
|
SlimScan C3 |
Parport |
|
Complete |
|
microtek2
|
|
|
SlimScan C6 |
USB |
0x05da/0x009a |
Complete |
|
microtek2
|
Link(s): http://www.minolta.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Dimage Scan Dual I |
SCSI |
|
Basic |
|
avision
|
|
|
Dimage Scan Dual II |
USB |
0x0638/0x026a |
Good |
1 pass, film-scanner |
avision
|
|
|
Dimage Scan Dual III |
USB |
0x0686/0x400d |
Basic |
1 pass, film-scanner |
avision
|
|
|
Dimage Scan Elite 5400 |
USB |
0x0686/0x400e |
Untested |
1 pass, film-scanner |
avision
|
|
|
Elite II |
USB |
0x0686/0x4004 |
Untested |
1 pass, film-scanner |
avision
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
SC-110 |
USB |
0x0638/0x0a15 |
Untested |
|
avision
|
|
|
SC-215 |
USB |
0x0638/0x0a16 |
Good |
|
avision
|
Link(s): http://www.mitsubishi.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Diamondview 648UT |
USB |
0x04a5/0x2022 |
Good |
Rebadged Benq 320u. |
SnapScan
|
|
|
Diamondview 650U |
USB |
0x04a5/0x20b0 |
Good |
Rebadged Benq 4300. |
SnapScan
|
|
|
MCA-ADFC |
SCSI |
|
Untested |
|
avision
|
|
|
S600C |
SCSI |
|
Untested |
|
avision
|
|
|
S1200C |
SCSI |
|
Untested |
|
avision
|
|
|
SS600 |
SCSI |
|
Good |
|
avision
|
Link(s): http://www.mustek.com/, http://www.mustek.com.tw/, http://www.mustek.de/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
96 CP |
Parport (EPP) |
|
Good |
300x600 dpi CIS scanner |
mustek_pp
|
|
|
600 III EP Plus |
Parport (EPP) |
|
Good |
300 dpi CCD scanner |
mustek_pp
|
|
|
1200 III EP |
Parport |
|
Unsupported |
Probably not supported. quarlewm at jmu dot edu offers to temporarily loan such a scanner to anyone who is interested in writing a driver. |
unsupported
|
? |
|
USB |
|
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
|
BearPaw 1200 |
USB |
0x0400/0x1001 |
Complete |
both product versions are supported, see backends' man-page |
plustek
|
|
|
BearPaw 1200 |
USB |
0x0400/0x1000 |
Complete |
both product versions are supported, see backends' man-page |
plustek
|
|
|
BearPaw 1200 CS |
USB |
0x055f/0x021e |
Good |
|
gt68xx
|
|
|
BearPaw 1200 CU |
USB |
0x05d8/0x4002 |
Good |
|
gt68xx
|
|
|
BearPaw 1200 CU Plus |
USB |
0x055f/0x021c |
Good |
|
gt68xx
|
|
|
BearPaw 1200 CU Plus |
USB |
0x055f/0x021b |
Good |
|
gt68xx
|
|
|
BearPaw 1200 F |
USB |
0x055f/0x0010 |
Good |
Works upto 600 dpi. No support for TA and ADF yet. |
ma1509
|
|
|
BearPaw 1200 TA |
USB |
0x055f/0x021e |
Good |
Transparency adapter supported |
gt68xx
|
|
|
BearPaw 1248 CU |
USB |
0x055f/0x021c |
Good |
Seems to use the same ids as BearPaw 1200 CU Plus. |
gt68xx
|
|
|
BearPaw 2400 |
USB |
0x0400/0x1001 |
Complete |
|
plustek
|
|
|
BearPaw 2400 CS |
USB |
0x055f/0x0218 |
Untested |
Probably works, reports are welcome |
gt68xx
|
|
|
BearPaw 2400 CS Plus |
USB |
0x055f/0x0219 |
Good |
Works, problems with 12/16 bit modes? |
gt68xx
|
|
|
BearPaw 2400 CU |
USB |
0x05d8/0x4002 |
Basic |
Works, but is slow |
gt68xx
|
|
|
BearPaw 2400 CU Plus |
USB |
0x055f/0x021d |
Good |
|
gt68xx
|
|
|
BearPaw 2400 TA |
USB |
0x055f/0x0218 |
Good |
Transparency adapter supported |
gt68xx
|
|
|
BearPaw 2400 TA Plus |
USB |
0x055f/0x0219 |
Good |
Transparency adapter supported |
gt68xx
|
|
|
USB |
0x055f/0x0400 |
Unsupported |
Not supported. May be supported by mustek_usb2 backend later. See link for some information. |
unsupported
|
? |
|
|
BearPaw 2448 CS Plus |
USB |
0x055f/0x021a |
Basic |
Slow. Same as 2448 TA Plus, but without TA. |
gt68xx
|
|
|
USB |
0x055f/0x0408 |
Unsupported |
Not supported. May be supported by mustek_usb2 backend later. See link for some information. |
unsupported
|
? |
|
|
BearPaw 2448 TA Plus |
USB |
0x055f/0x021a |
Basic |
Slow. Transparency adapter supported. Slow. Brightness depends on resolution? |
gt68xx
|
|
|
BearPaw 2448TA Pro |
USB |
0x055f/0x0409 |
Good |
|
mustek_usb2
|
|
|
USB |
0x055f/0x1000 |
Unsupported |
Not supported. See link for some information. |
unsupported
|
? |
|
|
USB |
0x055f/0x040a |
Unsupported |
Not supported. May be supported by mustek_usb2 backend later. See link for some information. |
unsupported
|
? |
|
|
USB |
0x055f/0x040b |
Unsupported |
Not supported. May be supported by mustek_usb2 backend later. See link for some information. |
unsupported
|
? |
|
|
Paragon 600 II CD |
SCSI |
|
Complete |
|
mustek
|
|
|
Paragon 600 II ED |
Parport |
|
Untested |
Completely untested. If it's the same as the 600 II EP, it may work. Please contact me if you own such a device. |
mustek
|
|
|
Paragon 600 II EP |
Parport |
|
Minimal |
Works, however only low resolutions and quality in color mode is bad. |
mustek
|
|
|
Paragon 600 II N |
Proprietary |
|
Basic |
Resolutions above 300 dpi may cause trouble. |
mustek
|
|
|
Paragon 800 II EP |
Parport |
|
Unsupported |
Not supported. Maybe similar to 600 II EP (SCSI_over-parport)? In this case it could be supported by the mustek SCSI backend. |
unsupported
|
? |
|
Paragon 800 II SP |
SCSI |
|
Complete |
|
mustek
|
|
|
Paragon 1200 A3 Pro |
SCSI |
|
Complete |
ADF and TA untested. Please contact me if you own such equipment. |
mustek
|
|
|
Paragon 1200 III SP |
SCSI |
|
Complete |
|
mustek
|
|
|
Paragon 1200 LS |
SCSI |
|
Complete |
|
mustek
|
|
|
Paragon 1200 SP Pro |
SCSI |
|
Good |
|
mustek
|
|
|
Paragon MFC-600S |
SCSI |
|
Complete |
|
mustek
|
|
|
Paragon MFC-800S |
SCSI |
|
Complete |
|
mustek
|
|
|
Paragon MFS-1200SP |
SCSI |
|
Complete |
|
mustek
|
|
|
Paragon MFS-6000CX |
SCSI |
|
Good |
3-pass |
mustek
|
|
|
Paragon MFS-6000SP |
SCSI |
|
Complete |
|
mustek
|
|
|
Paragon MFS-8000SP |
SCSI |
|
Complete |
|
mustek
|
|
|
Paragon MFS-12000CX |
SCSI |
|
Good |
3-pass |
mustek
|
|
|
Paragon MFS-12000SP |
SCSI |
|
Complete |
|
mustek
|
|
|
Plug-n-Scan 2400 M |
USB |
0x055f/0x0219 |
Good |
Works but is slow in high resolutions. Same as BearPaw 2400 CS Plus. |
gt68xx
|
|
|
Plug-n-Scan 2400 MT |
USB |
0x055f/0x0219 |
Good |
Works but is slow in high resolutions. Same as BearPaw 2400 TA Plus. |
gt68xx
|
|
|
ScanExpress 600 CP |
Parport (EPP) |
|
Good |
300x600 dpi CIS scanner |
mustek_pp
|
|
|
ScanExpress 600 CU |
USB |
0x055f/0x0002 |
Complete |
|
mustek_usb
|
|
|
ScanExpress 600 SEP |
Parport (EPP) |
|
Good |
300 dpi CCD scanner |
mustek_pp
|
|
|
USB |
0x055f/0x0873 |
Unsupported |
Unsupported. Programming information is available. |
unsupported
|
? |
|
|
ScanExpress 1200 CP |
Parport (EPP) |
|
Good |
600x1200 dpi CIS scanner |
mustek_pp
|
|
|
ScanExpress 1200 CP+ |
Parport (EPP) |
|
Good |
600x1200 dpi CIS scanner |
mustek_pp
|
|
|
ScanExpress 1200 CU |
USB |
0x055f/0x0001 |
Complete |
|
mustek_usb
|
|
|
ScanExpress 1200 CU Plus |
USB |
0x055f/0x0008 |
Complete |
|
mustek_usb
|
|
|
ScanExpress 1200 FS |
SCSI |
|
Untested |
One report that it crashes the computer. SCSI driver issue? Please contact me if you own such a device. |
mustek
|
|
|
ScanExpress 1200 UB |
USB |
0x055f/0x0006 |
Complete |
For the UB Plus, see gt68xx backend |
mustek_usb
|
|
|
ScanExpress 1200 UB Plus |
USB |
0x05d8/0x4002 |
Good |
|
gt68xx
|
|
|
USB |
0x055f/0x0003 |
Unsupported |
Unsupported. Programming information is available. |
unsupported
|
? |
|
|
USB |
0x055f/0x0007 |
Unsupported |
Unsupported. |
unsupported
|
? |
|
|
ScanExpress 1248 UB |
USB |
0x055f/0x021f |
Complete |
|
gt68xx
|
|
|
ScanExpress 2400 USB |
USB |
0x05d8/0x4002 |
Minimal |
Should be detected but may need some more work in the code. Testers welcome. Please contact me if you own this scanner. |
gt68xx
|
|
|
ScanExpress 6000 P |
Parport (EPP) |
|
Good |
300 dpi CCD scanner |
mustek_pp
|
|
|
ScanExpress 6000SP |
SCSI |
|
Complete |
|
mustek
|
|
|
Parport |
|
Unsupported |
Not supported. Asic 1505/05. |
unsupported
|
? |
|
|
ScanExpress 12000SP |
SCSI |
|
Complete |
|
mustek
|
|
|
ScanExpress 12000SP Plus |
SCSI |
|
Complete |
|
mustek
|
|
|
ScanExpress A3 EP |
Parport |
|
Unsupported |
Not supported. Maybe it will be supported by the mustek_pp backend in future. |
unsupported
|
? |
|
ScanExpress A3 SP |
SCSI |
|
Basic |
Please test! |
mustek
|
|
|
ScanExpress A3 USB |
USB |
0x055f/0x0210 |
Basic |
Still some vertical stripes. |
gt68xx
|
|
|
USB |
|
Unsupported |
Probably unsupported. USB business card scanner. Maybe works as USB storage device? |
unsupported
|
? |
|
|
ScanMagic 600 CP |
Parport (EPP) |
|
Good |
300x600 dpi CIS scanner |
mustek_pp
|
|
|
ScanMagic 600 II SP |
SCSI |
|
Complete |
|
mustek
|
|
|
ScanMagic 1200 UB Plus |
USB |
0x05d8/0x4002 |
Good |
Same as ScanExpress 1200 UB Plus |
gt68xx
|
|
|
ScanMagic 4800 P |
Parport (EPP) |
|
Good |
300 dpi CCD scanner |
mustek_pp
|
|
|
ScanMagic 4830S |
SCSI |
|
Untested |
sub model VM3575 |
teco2
|
|
|
Parport |
|
Unsupported |
Probably not supported. Same as Mustek 12000 P?. ASIC 1505. |
unsupported
|
? |
|
|
ScanMagic 9636S |
SCSI |
|
Complete |
|
mustek
|
|
|
ScanMagic 9636S Plus |
SCSI |
|
Complete |
|
mustek
|
|
|
TwainScan II SP |
SCSI |
|
Complete |
|
mustek
|
Link(s): http://www.nevt.co.jp/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
PC-IN500/4C |
SCSI |
|
Good |
PC-IN500/4C was sold only in JAPAN |
nec
|
|
|
USB |
0x0475/0x0100 |
Unsupported |
Most probably unsupported. See link for details. Vendor ID is Relisys/Teco. Not known if it is similar to other Relisys/Teco USB scanners. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Easy Plus 30 Bit |
Parport (EPP) |
|
Good |
300 dpi CCD scanner |
mustek_pp
|
Link(s): http://www.nikon.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
AX-110 / Scantouch 110 |
SCSI |
|
Untested |
may work, please test and give feedback |
umax
|
|
|
AX-210 |
SCSI |
|
Good |
OK |
umax
|
|
|
USB |
0x04b0/0x4001 |
Minimal |
|
coolscan2
|
||
|
LS 30 |
SCSI |
|
Complete |
working -- model available to developer |
coolscan2
|
|
|
LS 40 ED |
USB |
0x04b0/0x4000 |
Complete |
|
coolscan2
|
|
|
LS 50 ED |
USB |
0x04b0/0x4001 |
Minimal |
|
coolscan2
|
|
|
LS 2000 |
SCSI |
|
Good |
|
coolscan2
|
|
|
LS 4000 ED |
IEEE-1394 |
|
Good |
needs linux kernel 2.4.19 or later |
coolscan2
|
|
|
LS 8000 ED |
IEEE-1394 |
|
Good |
needs linux kernel 2.4.19 or later |
coolscan2
|
|
|
LS-20 |
SCSI |
|
Basic |
The LS-20 has been replaced by the LS-30 |
coolscan
|
|
|
LS-30 |
SCSI |
|
Basic |
alpha: only 24/30 bit RGB + 32/40 bit RGBI |
coolscan
|
|
|
LS-1000 |
SCSI |
|
Basic |
Doesn't support gamma correction |
coolscan
|
|
|
LS-2000 |
SCSI |
|
Basic |
alpha: only 24/36 bit + RGB 32/48 bit RGBI |
coolscan
|
|
|
USB |
0x04b0/0x4002 |
Untested |
May work, similar to LS 50 ED, but untested. Please tell us if it works. |
coolscan2
|
Link(s): http://www.olivetti.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0b3c/0xa880 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
Link(s): http://www.olympus.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
SCSI |
|
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Barcode scanner |
USB |
0x065a/0x0001 |
Unsupported |
Probably not supported. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Parport |
|
Unsupported |
|
unsupported
|
? |
|
|
Parport |
|
Unsupported |
|
unsupported
|
? |
|
|
Proprietary |
|
Unsupported |
Special ISA card |
unsupported
|
? |
|
|
Parport |
|
Unsupported |
|
unsupported
|
? |
|
|
Parport |
|
Unsupported |
|
unsupported
|
? |
|
|
Proprietary |
|
Unsupported |
Special ISA card |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Diamond 1200 |
USB |
0x05d8/0x4002 |
Good |
Similar to Mustek BearPaw 1200 (Plus) |
gt68xx
|
|
|
Diamond 1200 Plus |
USB |
0x055f/0x021b |
Good |
Similar to Mustek BearPaw 1200 Plus |
gt68xx
|
|
|
Diamond 1200 Plus |
USB |
0x055f/0x021c |
Good |
Similar to Mustek BearPaw 1200 Plus |
gt68xx
|
|
|
Diamond 2450 |
USB |
0x055f/0x0219 |
Good |
|
gt68xx
|
Link(s): http://www.panasonic.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
KV-S2025C |
SCSI |
|
Minimal |
no color, no high resolution, no automatic cropping |
matsushita
|
|
|
KV-S2026C |
USB SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S2045C |
SCSI |
|
Minimal |
no color, no high resolution, no automatic cropping |
matsushita
|
|
|
KV-S2046C |
USB SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S2055L |
SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S2055W |
USB SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S2065L |
SCSI |
|
Minimal |
no color, no high resolution, no automatic cropping |
matsushita
|
|
|
KV-S2065W |
SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S3065CL |
USB SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S3065CW |
USB SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S3085 |
USB SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S3105C |
USB SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S6040W |
SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S6045W |
SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S6050W |
SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S6055W |
SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-S7065C |
USB SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
KV-SS25 |
SCSI |
|
Complete |
|
matsushita
|
|
|
KV-SS25D |
SCSI |
|
Complete |
|
matsushita
|
|
|
KV-SS50 |
SCSI |
|
Untested |
|
matsushita
|
|
|
KV-SS50EX |
SCSI |
|
Untested |
|
matsushita
|
|
|
KV-SS55 |
SCSI |
|
Untested |
|
matsushita
|
|
|
KV-SS55EX |
SCSI |
|
Minimal |
no color, no high resolution, no automatic cropping |
matsushita
|
|
|
KV-SS850 |
SCSI |
|
Untested |
|
matsushita
|
|
|
KV-SS855 |
SCSI |
|
Untested |
|
matsushita
|
|
|
KV-SS905C |
SCSI |
|
Unsupported |
might be supported by matsushita backend. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0a82/0x2000 |
Unsupported |
Probably not supported. Some information is available. |
unsupported
|
? |
Link(s): http://www.scanace.com/
Comment:
Pacific Image Electronics
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB IEEE-1394 |
0x05e3/0x0142 |
Unsupported |
Probably unsupported. Film scanner that can scan directly from the magazine. |
unsupported
|
? |
|
|
USB |
0x05e3/0x0120 |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
|
|
Primefilm 3600PRO |
USB IEEE-1394 |
|
Unsupported |
Probably not supported. |
unsupported
|
? |
|
ScanAce 630S |
SCSI |
|
Untested |
|
pie
|
|
|
ScanAce 636S |
SCSI |
|
Untested |
|
pie
|
|
|
ScanAce 1230S |
SCSI |
|
Good |
|
pie
|
|
|
ScanAce 1236S |
SCSI |
|
Good |
|
pie
|
|
|
ScanAce II |
SCSI |
|
Untested |
|
pie
|
|
|
ScanAce II Plus |
SCSI |
|
Untested |
|
pie
|
|
|
ScanAce III |
SCSI |
|
Good |
|
pie
|
|
|
ScanAce III Plus |
SCSI |
|
Untested |
|
pie
|
|
|
ScanAce Plus |
SCSI |
|
Untested |
|
pie
|
|
|
ScanAce ScanMedia |
SCSI |
|
Untested |
|
pie
|
|
|
ScanAce ScanMedia II |
SCSI |
|
Untested |
|
pie
|
|
|
ScanAce V |
SCSI |
|
Untested |
|
pie
|
Link(s): http://www.image-land.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Splendeur 3024 |
SCSI |
|
Good |
sub model VM3552 |
teco3
|
Link(s): http://www.planon.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
DocuPen (DPEN-BW) |
USB |
|
Unsupported |
Probably not supported. No details known. |
unsupported
|
? |
|
USB |
0x10c4/0xea60 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
DocuPen RC800 |
USB |
|
Unsupported |
Probably not supported. No details known. |
unsupported
|
? |
Link(s): http://www.plustek.com/, http://www.plustek.de/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
OptiCard 600+ |
USB |
|
Unsupported |
Business card reader. No further information available. |
unsupported
|
? |
|
USB |
0x07b3/0x0900 |
Unsupported |
GL842 based (similar to GL841?), maybe ca be added to genesys backend. Bookscanner. |
unsupported
|
? |
|
|
USB |
0x07b3/0x0807 |
Unsupported |
GL841 based, to be added to genesys backend |
unsupported
|
? |
|
|
OpticPro 600P/6000P |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro 1212U |
USB |
0x07b3/0x0001 |
Basic |
|
u12
|
|
|
OpticPro 1236P |
Parport (SPP, EPP) |
|
Complete |
reported as OpticPro 12000P/96000P |
plustek_pp
|
|
|
OpticPro 1248U |
USB |
0x07b3/0x0401 |
Good |
|
gt68xx
|
|
|
OpticPro 1248U |
USB |
0x07b3/0x0400 |
Good |
|
gt68xx
|
|
|
OpticPro 2400SP |
SCSI |
|
Untested |
sub model VM3552 |
teco3
|
|
|
OpticPro 4800P |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro 4830P |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro 4831P |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro 9600P |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro 9630P |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro 9630PL |
Parport (SPP, EPP) |
|
Complete |
use driver-switch mov=1 |
plustek_pp
|
|
|
OpticPro 9636P |
Parport (SPP, EPP) |
|
Complete |
use driver-switch mov=4 |
plustek_pp
|
|
|
OpticPro 9636P+/Turbo |
Parport (SPP, EPP) |
|
Complete |
use driver-switch mov=3 |
plustek_pp
|
|
|
OpticPro 9636T |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro 12000P/96000P |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro 12000T |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro 19200S |
SCSI |
|
Complete |
rebadged Artec AM12S |
artec
|
|
|
OpticPro A3U |
USB |
|
Unsupported |
Uses Plustek ASIC P99002 |
unsupported
|
? |
|
OpticPro AI3 |
Parport (SPP, EPP) |
|
Basic |
use driver-switch mov=5, poor picture quality |
plustek_pp
|
|
|
OpticPro P8 |
Parport |
|
Untested |
|
plustek_pp
|
|
|
OpticPro P12 |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro PT12 |
Parport (SPP, EPP) |
|
Complete |
|
plustek_pp
|
|
|
OpticPro S6 |
USB |
|
Unsupported |
Uses RealTek chipset (RTL8801D) |
unsupported
|
? |
|
USB |
0x07b3/0x0600 |
Unsupported |
Product id 0x0600 is unsupported but may be supported by the genesys backend in future. Product id 0x040b is supported by the gt68xx backend. |
unsupported
|
? |
|
|
OpticPro S12 |
USB |
0x07b3/0x040b |
Basic |
Product ID 0x040b only. Needs more testing. Please contact me if you own such a scanner. |
gt68xx
|
|
|
USB |
0x07b3/0x0601 |
Unsupported |
Product id 0x0601 is unsupported but may be supported by the genesys backend in future /GL646). Product id 0x040e is supported by the gt68xx backend. |
unsupported
|
? |
|
|
OpticPro S24 |
USB |
0x07b3/0x040e |
Basic |
Product ID 0x040e only. Needs more testing. Please contact me if you own such a scanner. |
gt68xx
|
|
|
USB |
0x07b3/0x0801 |
Unsupported |
GL841 based, to be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x07b3/0x0600 |
Unsupported |
Product id 0x0600 is unsupported but may be supported by the genesys backend in future. Product id 0x040b is supported by the gt68xx backend. |
unsupported
|
? |
|
|
OpticPro ST12 |
USB |
0x07b3/0x040b |
Untested |
Product ID 0x040b only. Needs testing. Transparency adapter completely untested. Please contact me if you own such a scanner. |
gt68xx
|
|
|
USB |
0x07b3/0x0600 |
Unsupported |
GL646 based, to be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x07b3/0x0601 |
Unsupported |
GL646 based, to be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x07b3/0x0801 |
Unsupported |
GL841 based, to be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x07b3/0x0800 |
Unsupported |
GL841 based, to be added to genesys backend |
unsupported
|
? |
|
|
OpticPro ST64 |
USB |
|
Unsupported |
No further information available. |
unsupported
|
? |
|
OpticPro ST64+ |
USB |
|
Unsupported |
Is reported to be based on a GL843 chipset. |
unsupported
|
? |
|
OpticPro U12 |
USB |
0x07b3/0x0001 |
Basic |
Note: Only devices with product ID 0x0001 are supported! |
u12
|
|
|
OpticPro U12 |
USB |
0x07b3/0x0010 |
Complete |
NOTE: Devices with product ID 0x0001 are not supported! |
plustek
|
|
|
OpticPro U16B |
USB |
0x07b3/0x0402 |
Good |
|
gt68xx
|
|
|
OpticPro U16B+ |
USB |
0x07b3/0x0403 |
Good |
|
gt68xx
|
|
|
OpticPro U24 |
USB |
0x07b3/0x0015 |
Complete |
|
plustek
|
|
|
OpticPro U24 |
USB |
0x07b3/0x0011 |
Complete |
|
plustek
|
|
|
OpticPro UA18 |
USB |
|
Unsupported |
Probably LM983x based. |
unsupported
|
? |
|
OpticPro UT12 |
USB |
0x07b3/0x0001 |
Basic |
Note: Only devices with product ID 0x0001 are supported! |
u12
|
|
|
OpticPro UT12 |
USB |
0x07b3/0x0017 |
Complete |
Note: Devices with product ID 0x0001 are not supported! |
plustek
|
|
|
OpticPro UT16 |
USB |
0x07b3/0x0017 |
Complete |
|
plustek
|
|
|
OpticPro UT16B |
USB |
0x07b3/0x0403 |
Untested |
Probably works. Transparency adapter not supported yet. Please contact me if you own such a device. |
gt68xx
|
|
|
OpticPro UT24 |
USB |
0x07b3/0x0017 |
Complete |
|
plustek
|
|
|
OpticSlim 1200 |
USB |
0x07b3/0x0413 |
Good |
|
gt68xx
|
|
|
OpticSlim 2400 |
USB |
0x07b3/0x0422 |
Good |
Works up to 1200 dpi. |
gt68xx
|
|
|
USB |
0x07b3/0x0806 |
Unsupported |
GL841 based, to be added to genesys backend |
unsupported
|
? |
|
|
OpticSlim M12 |
USB |
0x07b3/0x0412 |
Basic |
Scans, but no calibration is performed and the area selection is limited. |
gt68xx
|
|
|
OpticWorks 2000 |
Parport |
|
Unsupported |
Multifunction device. No further information available. |
unsupported
|
? |
|
USB |
0x07b3/0x081c |
Unsupported |
GL841 based, to be added to genesys backend |
unsupported
|
? |
|
|
Spectra ADF |
Proprietary |
|
Unsupported |
Unsupported. Uses proprietary ISA card that also provides power and is labelled GPS-1 PAGE-A from Taiwan. Other labels on the scanner include ADF Color Scanner and SF600AS. Maybe the same as the IBM ADF Color Scanner? |
unsupported
|
? |
|
Unknown Plustek Device |
USB |
0x07b3/0x0016 |
Unsupported |
Probably unsupported. Scanner name not known yet. |
unsupported
|
? |
|
Unknown Plustek Device |
USB |
0x07b3/0x0012 |
Unsupported |
Probably unsupported. Scanner name not known yet. |
unsupported
|
? |
|
Unknown Plustek Device |
USB |
0x07b3/0x0014 |
Unsupported |
Probably unsupported. Scanner name not known yet. |
unsupported
|
? |
|
Unknown Plustek Device |
USB |
0x07b3/0x0012 |
Unsupported |
Probably unsupported. Scanner name not known yet. |
unsupported
|
? |
|
Unknown Plustek Device |
USB |
0x07b3/0x0012 |
Unsupported |
Probably unsupported. Scanner name not known yet. |
unsupported
|
? |
|
Unknown Plustek Device |
USB |
0x07b3/0x000f |
Unsupported |
Probably unsupported. Scanner name not known yet. |
unsupported
|
? |
|
Unknown Plustek Device |
USB |
0x07b3/0x0007 |
Unsupported |
Probably unsupported. Scanner name not known yet. |
unsupported
|
? |
|
Unknown Plustek Device |
USB |
0x07b3/0x0005 |
Unsupported |
Probably unsupported. Scanner name not known yet. |
unsupported
|
? |
|
Unknown Plustek Device (UT12?) |
USB |
0x07b3/0x0013 |
Unsupported |
Probably unsupported. Scanner name not known yet. |
unsupported
|
? |
Link(s): http://www.primax.nl/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0461/0x0341 |
Unsupported |
Not supported. Some information is available. |
unsupported
|
? |
|
|
Parport |
|
Unsupported |
Unsupported by SANE. But is reported to partly work with pxscan. See link. |
unsupported
|
? |
|
|
Colorado 1200u |
USB |
0x0461/0x0361 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
Colorado 4800 |
Parport (SPP, EPP) |
|
Untested |
same as OpticPro 4800P |
plustek_pp
|
|
|
Parport |
|
Unsupported |
Not supported. However, a stand-alone program is available. |
unsupported
|
? |
|
|
Parport |
|
Unsupported |
Not supported. However, a stand-alone program is available. |
unsupported
|
? |
|
|
USB |
0x0461/0x0340 |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
|
|
Compact 4800 Direct |
Parport (SPP, EPP) |
|
Complete |
use driver-switch mov=2 |
plustek_pp
|
|
|
Compact 4800 Direct-30 |
Parport (SPP, EPP) |
|
Complete |
same as OpticPro 4830P, use driver-switch mov=7 |
plustek_pp
|
|
|
Compact 4800 SCSI |
SCSI |
|
Complete |
Mustek 600 II CD compatible |
mustek
|
|
|
Compact 9600 Direct-30 |
Parport (SPP, EPP) |
|
Complete |
same as OpticPro 9630P |
plustek_pp
|
|
|
G2-300 |
USB |
0x0461/0x0300 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
G2-300 #2 |
USB |
0x0461/0x0302 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
G2-600 |
USB |
0x0461/0x0380 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
G2-600 #2 |
USB |
0x0461/0x0382 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
G2E-300 |
USB |
0x0461/0x0301 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
G2E-300 #2 |
USB |
0x0461/0x0303 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
G2E-600 |
USB |
0x0461/0x0383 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
Jewel 4800 |
SCSI |
|
Good |
sub model VM356A |
teco2
|
|
|
OneTouch 5300 |
Parport |
|
Unsupported |
Not supported. |
unsupported
|
? |
|
USB |
0x0461/0x0347 |
Unsupported |
Unsupported. Same as Visioneer Onetouch 4400. See link for details. |
unsupported
|
? |
|
|
Profi 9600 |
SCSI |
|
Basic |
sub model VM6575 |
teco2
|
|
|
Profi 19200 |
SCSI |
|
Good |
sub model VM6586 |
teco2
|
|
|
ReadyScan 636i |
USB |
0x0461/0x0381 |
Unsupported |
Probably unsupported. No details known. |
unsupported
|
? |
|
Slim-Line 1200 |
USB |
|
Unsupported |
Maybe GL646. Maybe similar to Medion MD 6228? |
unsupported
|
? |
Link(s): http://www.fida.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Winscan Pro 2000 |
USB Parport |
|
Unsupported |
Not supported. No further information available. |
unsupported
|
? |
|
USB |
0x06dc/0x0014 |
Unsupported |
Not supported. Some information is available. Vendor=0x06dc product=0x0014. RealTek RTS8801. |
unsupported
|
? |
Link(s): http://www.quato.de/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
X-Finity |
SCSI |
|
Unsupported |
Probably not supported. No details yet. Originally manufactured by PFU? |
unsupported
|
? |
|
X-Finity Ultra |
USB IEEE-1394 |
|
Unsupported |
Probably not supported. No details yet. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB IEEE-1394 |
0x05e3/0x0142 |
Unsupported |
Film scanner that can scan directly from the magazine. |
unsupported
|
? |
|
|
USB |
0x05e3/0x0120 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB IEEE-1394 |
0x05e3/0x0143 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
Link(s): http://www.relisys.com/, http://www.tecoimage.com.tw/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
APOLLO Express 3 |
SCSI |
|
Basic |
sub model VM356A |
teco2
|
|
|
APOLLO Express 6 |
SCSI |
|
Good |
sub model VM6565 |
teco2
|
|
|
AVEC 2400 |
SCSI |
|
Complete |
sub model VM3520 |
teco1
|
|
|
AVEC 2412 |
SCSI |
|
Complete |
sub model VM3520+ |
teco1
|
|
|
AVEC 4800 |
SCSI |
|
Untested |
sub model VM4530 |
teco1
|
|
|
AVEC 4816 |
SCSI |
|
Untested |
sub model VM4530+ |
teco1
|
|
|
AVEC II S3 |
SCSI |
|
Good |
sub model VM3564 |
teco2
|
|
|
AVEC Super 3 |
SCSI |
|
Untested |
sub model VM3575 |
teco2
|
|
|
USB |
0x0475/0x0103 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x0475/0x0103 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
|
Infinity Scorpio |
SCSI |
|
Good |
sub model VM3552 |
teco3
|
|
|
RELI 2400 |
SCSI |
|
Untested |
sub model VM3530 |
teco1
|
|
|
RELI 2412 |
SCSI |
|
Complete |
sub model VM3530+ |
teco1
|
|
|
RELI 4816 |
SCSI |
|
Complete |
sub model VM4540 |
teco1
|
|
|
RELI 4830 |
SCSI |
|
Good |
sub model VM4542 |
teco1
|
|
|
RELI 9600 |
SCSI |
|
Untested |
sub model VM6530 |
teco1
|
|
|
RELI 9612 |
SCSI |
|
Untested |
sub model VM6530* |
teco1
|
|
|
RELI 9624 |
SCSI |
|
Untested |
sub model VM6530+ |
teco1
|
|
|
RELI 9630 |
SCSI |
|
Untested |
sub model VM6540 |
teco1
|
|
|
RELI DS6 |
SCSI |
|
Untested |
sub model VM3420 |
teco1
|
|
|
RELI DS15 |
SCSI |
|
Untested |
sub model VM3440 |
teco1
|
|
|
SCORPIO Pro |
SCSI |
|
Good |
sub model VM6575 |
teco2
|
|
|
SCORPIO Pro-S |
SCSI |
|
Untested |
sub model VM6586 |
teco2
|
|
|
SCORPIO Super 3 |
SCSI |
|
Good |
sub model VM3575 |
teco2
|
|
|
USB |
0x0475/0x0210 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
19200i |
USB |
0x07b3/0x0400 |
Good |
Similar to Plustek OpticPro 1248U |
gt68xx
|
|
|
RevScan Orange R48Ti |
USB |
0x07b3/0x0001 |
Basic |
Rebadged Plustek OpticPro UT12 |
u12
|
Link(s): http://www.ricoh.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
IS-410 |
SCSI |
|
Untested |
Untested, please report! |
ibm
|
|
|
IS-420 |
SCSI |
|
Basic |
Works at least in flatbed mode. |
ibm
|
|
|
IS-430 |
SCSI |
|
Untested |
Untested, please report! |
ibm
|
|
|
Ricoh IS50 |
SCSI |
|
Basic |
|
ricoh |
|
|
Ricoh IS60 |
SCSI |
|
Basic |
|
ricoh |
Link(s): http://www.scanport.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
SQ300 |
Parport? |
|
Basic |
|
microtek2
|
|
|
SQ2030 |
Parport |
|
Basic |
|
microtek2
|
|
|
SQ4836 |
SCSI |
|
Basic |
|
microtek2
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0a82/0x6605 |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
Link(s): http://www.sceptre.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Vividscan S1200 |
SCSI |
|
Basic |
|
sceptre
|
Link(s): http://sharp-world.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
JX-250 |
SCSI |
|
Good |
|
sharp
|
|
|
JX-320 |
SCSI |
|
Good |
|
sharp
|
|
|
JX-325 |
SCSI |
|
Untested |
|
sharp
|
|
|
JX-330 |
SCSI |
|
Good |
|
sharp
|
|
|
JX-350 |
SCSI |
|
Good |
|
sharp
|
|
|
JX-610 |
SCSI |
|
Good |
|
sharp
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
proprietary |
|
Unsupported |
Not supported until now. Work on a backend has started, contact the author for details (see link) |
unsupported
|
? |
Link(s): http://www.siemens.com/, http://www.siemens.de/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
9036 Flatbed scanner |
SCSI |
|
Basic |
|
s9036 |
|
|
Cherry FingerTIP ID Board - Sensor |
USB |
0x0681/0x0010 |
Unsupported |
Not supported. |
unsupported
|
? |
|
ID Mouse Professional |
USB |
0x0681/0x0005 |
Unsupported |
Not supported. |
unsupported
|
? |
|
S9036 |
SCSI |
|
Untested |
gray only |
agfafocus |
|
|
ST400 |
SCSI |
|
Basic |
6 bit gray |
st400
|
|
|
ST800 |
SCSI |
|
Basic |
6 bit gray |
st400
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
SmartScan 3600 |
USB IEEE-1394 |
|
Unsupported |
Probably not supported. Same as PIE Primefilm 2600 PRO. |
unsupported
|
? |
Comment: Spot seems have gone out of business.
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
proprietary |
|
Unsupported |
Not supported until now. Work on a backend has started, see link for more information. |
unsupported
|
? |
|
|
proprietary |
|
Unsupported |
Not supported. Work on a backend has started, see link for more information. |
unsupported
|
? |
|
|
proprietary |
|
Unsupported |
Not supported. Work on a backend has started, see link for more information. |
unsupported
|
? |
Link(s): http://www.syscaninc.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0a82/0x4600 |
Unsupported |
Not supported. LM9832. Some information is available. See link for details. |
unsupported
|
? |
|
|
TravelScan 662 |
USB |
0x0a82/0x6620 |
Complete |
|
plustek
|
|
|
USB |
0x0a82/0x0530 |
Unsupported |
Not supported. May work with the Plustek backend in future. See link for details. |
unsupported
|
? |
|
|
USB |
0x0a82/0x2000 |
Unsupported |
Probably not supported. Some information is available. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Artiscan 6000C |
SCSI |
|
Good |
3 pass, 300 DPI |
tamarack |
|
|
Artiscan 8000C |
SCSI |
|
Good |
3 pass, 400 DPI |
tamarack |
|
|
Parport |
|
Unsupported |
Unsupported at the moment. See link for a project for that scanner taht may support it in future. |
unsupported
|
? |
|
|
Parport |
|
Unsupported |
Unsupported at the moment. See link for a project for that scanner. |
unsupported
|
? |
|
|
Artiscan 12000C |
SCSI |
|
Good |
3 pass, 600 DPI |
tamarack |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Funline TS6 EP |
Parport (EPP) |
|
Good |
300x600 dpi CIS scanner |
mustek_pp
|
|
|
Funline TS12 EP |
Parport (EPP) |
|
Good |
600x1200 dpi CIS scanner |
mustek_pp
|
Link(s): http://www.tce.com.br/
Comment:
Brasilian vendor.
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0461/0x0346 |
Unsupported |
Not supported. Some information is available. |
unsupported
|
? |
|
|
Parport |
|
Unsupported |
Not supported by SANE but is reported to work with pxscan (see link). |
unsupported
|
? |
Link(s): http://www.tecoimage.com.tw/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x080d/0x0102 |
Unsupported |
Probably unsupported. See link for details. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0461/0x0347 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
Link(s): http://www.nikon.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
PowerScanII |
SCSI |
|
Good |
OK |
umax
|
Link(s): http://www.trust-site.com,
http://www.trust-site.com/home/,
http://www.trust.com
Comment:
Carefully check the model names. Trust uses similar names for
completely different hardware.
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
240H Easy Webscan Gold |
USB |
0x05d8/0x4007 |
Basic |
Works up to 600 dpi |
artec_eplus48u |
|
|
240TH Easy Webscan Gold |
USB |
0x055f/0x0218 |
Good |
Same as Mustek Bearpaw 2400 TA plus. |
gt68xx
|
|
|
Parport USB |
0x05cb/0x1483 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
Compact Scan USB 19200 |
USB |
0x055f/0x0006 |
Complete |
Mustek 1200 UB compatible |
mustek_usb
|
|
|
Compact Scan USB 19200 |
USB |
0x05d8/0x4002 |
Good |
Works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus) |
gt68xx
|
|
|
Direct WebScan 19200 |
USB |
0x055f/0x021c |
Good |
Same as Mustek BearPaw 1200 CU Plus (0x021c). |
gt68xx
|
|
|
Easy Connect 9600+ |
Parport (EPP) |
|
Good |
300x600 dpi CIS scanner |
mustek_pp
|
|
|
Easy Connect 19200+ |
Parport (EPP) |
|
Good |
300x600 dpi CIS scanner |
mustek_pp
|
|
|
Easy Scan 9600 Plus |
Parport |
|
Basic |
Requires the program 'as6edriver' to run. |
as6e
|
|
|
Easy Webscan 19200 |
USB |
0x05d8/0x4006 |
Good |
|
artec_eplus48u |
|
|
Flat Scan USB 19200 |
USB |
0x05d8/0x4002 |
Good |
Similar to Artec Ultima 2000 |
gt68xx
|
|
|
Imagery 1200 |
SCSI |
|
Good |
3-pass, Mustek Paragon MFS-6000CX compatible |
mustek
|
|
|
Imagery 1200 SP |
SCSI |
|
Complete |
Mustek Paragon MFS-6000SP compatible |
mustek
|
|
|
Imagery 2400 SP |
SCSI |
|
Good |
sub model VM3552 |
teco3
|
|
|
Imagery 4800 SP |
SCSI |
|
Complete |
Mustek Paragon 600 II CD compatible |
mustek
|
|
|
Imagery 4800 SP+ |
SCSI |
|
Good |
sub model VM3552 |
teco3
|
|
|
Imagery 9600 SP |
SCSI |
|
Untested |
sub model VM3552 |
teco3
|
|
|
Office Scan USB 19200 |
USB |
0x047b/0x1000 |
Complete |
|
niash
|
|
|
SCSI Connect 19200 |
SCSI |
|
Complete |
Mustek ScanExpress 12000SP compatible |
mustek
|
|
|
SCSI excellence series 19200 |
SCSI |
|
Complete |
Mustek ScanExpress 12000SP compatible |
mustek
|
|
|
SCSI |
|
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
Link(s): http://www.umax.com/, http://www.umax.com.tw/, http://www.umax.de/en, http://www.umax-europe.com, http://www.umaxjapan.co.jp, http://www.umax.com.cn
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Astra 600P |
Parport (SPP/ECP) |
|
Unsupported |
untested, but should be close to 610P |
umax_pp
|
|
|
Astra 600S |
SCSI |
|
Good |
OK |
umax
|
|
|
Astra 610P |
Parport (SPP/ECP) |
|
Good |
|
umax_pp
|
|
|
Astra 610S |
SCSI |
|
Good |
OK |
umax
|
|
|
Astra 1200S |
SCSI |
|
Good |
OK |
umax
|
|
|
Astra 1220P |
Parport (EPP/ECP) |
|
Good |
|
umax_pp
|
|
|
Astra 1220S |
SCSI |
|
Good |
OK |
umax
|
|
|
Astra 1220U |
USB |
0x1606/0x0010 |
Good |
|
umax1220u
|
|
|
Astra 1600P |
Parport (EPP/ECP) |
|
Good |
|
umax_pp
|
|
|
Astra 1600U |
USB |
0x1606/0x0030 |
Untested |
Untested but probably works. Please tell us how well the scanner works. |
umax1220u
|
|
|
Astra 2000P |
Parport (EPP/ECP) |
|
Good |
|
umax_pp
|
|
|
Astra 2000U |
USB |
0x1606/0x0030 |
Minimal |
Untested but probably works. Please tell us how well the scanner works. |
umax1220u
|
|
|
Astra 2100S |
SCSI |
|
Good |
OK |
umax
|
|
|
Astra 2100U |
USB |
0x1606/0x0130 |
Good |
|
umax1220u
|
|
|
Astra 2200 (SU) |
USB |
0x1606/0x0230 |
Good |
OK, needs USB control messages |
umax
|
|
|
Astra 2200 (SU) |
SCSI |
|
Good |
OK |
umax
|
|
|
Astra 2400S |
SCSI |
|
Good |
OK |
umax
|
|
|
USB |
0x0461/0x0374 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x0461/0x038a |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x1606/0x0050 |
Unsupported |
USB product ID 0x0050 is not supported. USB product id 0x0060 is supported by the plustek backend. See link for details. |
unsupported
|
? |
|
|
USB |
0x0461/0x038a |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x1606/0x1030 |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x0461/0x038c |
Unsupported |
Not supported, to be added to genesys backend. |
unsupported
|
? |
|
|
USB |
0x1606/0x0070 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x1606/0x0070 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x0638/0x0a10 |
Unsupported |
GL646 based, to be added to genesys backend. Avision iVina FB1600 clone |
unsupported
|
? |
|
|
Astra 4600 |
USB |
|
Unsupported |
Probably not supported, no details known. |
unsupported
|
? |
|
USB |
0x0638/0x0a20 |
Unsupported |
GL646/GL660 based. Avision iVina FB1800 clone. |
unsupported
|
? |
|
|
Astra 6400 |
IEEE-1394 |
|
Unsupported |
will propably work one day |
umax
|
|
|
Astra 6450 |
IEEE-1394 |
|
Unsupported |
will propably work one day |
umax
|
|
|
Astra 6700 |
USB |
|
Unsupported |
Not supported. No chipset information available. Same as Avision iVina FB2400. |
unsupported
|
? |
|
Astra MX3 |
USB |
|
Good |
OK, needs USB control messages |
umax
|
|
|
Astra MX3 |
SCSI |
|
Good |
OK |
umax
|
|
|
USB |
0x080d/0x0104 |
Unsupported |
Probably not supported currently. See link for more details. |
unsupported
|
? |
|
|
AstraSlim 1200 SE |
USB |
0x05d8/0x4010 |
Good |
|
artec_eplus48u |
|
|
USB |
0x080d/0x0104 |
Unsupported |
Probably not supported currently. See link for more details. |
unsupported
|
? |
|
|
AstraSlim SE |
USB |
0x05d8/0x4009 |
Good |
|
artec_eplus48u |
|
|
Gemini D-16 |
SCSI |
|
Good |
OK |
umax
|
|
|
Mirage D-16L |
SCSI |
|
Good |
OK |
umax
|
|
|
Mirage II |
SCSI |
|
Good |
OK |
umax
|
|
|
Mirage IIse |
SCSI |
|
Good |
OK |
umax
|
|
|
PL-II |
SCSI |
|
Good |
OK |
umax
|
|
|
PowerLook |
SCSI |
|
Good |
OK, SCSI-ID=PS-2400X |
umax
|
|
|
USB |
|
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
PowerLook 270 |
SCSI |
|
Unsupported |
incompatible |
umax
|
|
|
PowerLook 270plus |
SCSI |
|
Unsupported |
incompatible |
umax
|
|
|
Powerlook 1000 USB |
USB |
|
Unsupported |
Probably not supported. No further information available. |
unsupported
|
? |
|
PowerLook 1100 |
IEEE-1394 |
|
Unsupported |
will propably work one day |
umax
|
|
|
PowerLook 2000 |
SCSI |
|
Good |
OK |
umax
|
|
|
PowerLook 2100XL |
SCSI |
|
Good |
OK |
umax
|
|
|
PowerLook 3000 |
SCSI |
|
Good |
OK |
umax
|
|
|
PowerLook III |
SCSI |
|
Good |
OK |
umax
|
|
|
PSD |
SCSI |
|
Good |
OK |
umax
|
|
|
Supervista S-12 |
SCSI |
|
Good |
OK |
umax
|
|
|
UC 630 |
SCSI |
|
Good |
Version 2.8 OK, others only lineart OK |
umax
|
|
|
UC 840 |
SCSI |
|
Good |
Version 1.6 OK, others only lineart OK |
umax
|
|
|
UC 1200S |
SCSI |
|
Untested |
may work, please test and give feedback |
umax
|
|
|
UC 1200SE |
SCSI |
|
Good |
Version 3.0 OK, others unknown |
umax
|
|
|
UC 1260 |
SCSI |
|
Good |
Version 1.6 OK, others unknown |
umax
|
|
|
UG 80 |
SCSI |
|
Good |
OK |
umax
|
|
|
UG 630 |
SCSI |
|
Good |
OK |
umax
|
|
|
UMAX 3400 |
USB |
0x1606/0x0060 |
Complete |
there are some UMAX 3400 outside the U.S. which are not supported, as they use another chipset than the LM983x |
plustek
|
|
|
UMAX 3400 |
USB |
0x1606/0x0050 |
Complete |
there are some UMAX 3400 outside the U.S. which are not supported, as they use another chipset than the LM983x |
plustek
|
|
|
UMAX 3450 |
USB |
0x1606/0x0060 |
Complete |
|
plustek
|
|
|
UMAX 5400 |
USB |
0x1606/0x0160 |
Complete |
|
plustek
|
|
|
UMAX Astranet ia101 |
USB |
0x1606/0x0060 |
Complete |
seems to be a renamed UMAX 3400 |
plustek
|
|
|
UMAX S-6E |
SCSI |
|
Good |
OK |
umax
|
|
|
UMAX S-6EG |
SCSI |
|
Good |
OK |
umax
|
|
|
UMAX S-12 |
SCSI |
|
Good |
OK |
umax
|
|
|
UMAX S-12G |
SCSI |
|
Good |
OK |
umax
|
|
|
UMAX VT600 |
SCSI |
|
Untested |
may work, please test and give feedback |
umax
|
|
|
Vista S6 |
SCSI |
|
Good |
OK |
umax
|
|
|
Vista S6E |
SCSI |
|
Good |
OK |
umax
|
|
|
Vista-S8 |
SCSI |
|
Good |
OK |
umax
|
|
|
Vista-T630 |
SCSI |
|
Good |
OK for some firmwareversions, on others only lineart OK |
umax
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x04a7/0x0224 |
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
Link(s): http://www.visioneer.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
6200 |
USB |
0x0461/0x0345 |
Unsupported |
Not supported. Is reported to use the E5 chipset. Uses a Primax ID. Looks similar to Primascan Colorado 2600u. |
unsupported
|
? |
|
6200 EPP/USB |
USB |
0x04a7/0x0311 |
Unsupported |
Not supported. Id is from Primax? Yet another scanner with the same name? |
unsupported
|
? |
|
USB |
0x04a7/0x0421 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x0461/0x0347 |
Unsupported |
Not supported. E5 chipset? See link for more details. |
unsupported
|
? |
|
|
USB |
0x04a7/0x0224 |
Unsupported |
Unsupported. Seems to use Realtek RTS8801B. Same as Microtek Scanport 3000. See link for details. |
unsupported
|
? |
|
|
OneTouch 5300 |
USB |
0x04a7/0x0221 |
Unsupported |
Not supported. Yet another scanner with this name? |
unsupported
|
? |
|
USB |
0x04a7/0x0226 |
Unsupported |
Not supported. Chipset is RTS8801B(?). See link for output of /proc/bus/usb/devices. |
unsupported
|
? |
|
|
USB |
0x04a7/0x0226 |
Unsupported |
Unsupported. 48 bit scanner, doesn't work with viceo backend. RTS8801C. |
unsupported
|
? |
|
|
USB |
0x04a7/0x022a |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x04a7/0x0229 |
Unsupported |
GL646 based, to be added to genesys backend |
unsupported
|
? |
|
|
OneTouch 7300 |
USB |
0x04a7/0x0444 |
Good |
Works upto 1200 dpi and 12 bits/color. |
gt68xx
|
|
|
USB |
0x04a7/0x0321 |
Unsupported |
Unsupported. See link for details. |
unsupported
|
? |
|
|
USB |
0x04a7/0x0371 |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
|
|
Onetouch 8900 |
USB |
|
Unsupported |
Not supported. Same as 8920 but without TA? |
unsupported
|
? |
|
USB |
0x04a7/0x0371 |
Unsupported |
Not supported. Same as 8700 and 8900 but includes a TA. Uses a Primax ID. Chipset is RTS8801C. See link for output of /proc/bus/usb/devices. |
unsupported
|
? |
|
|
USB |
0x04a7/0x022c |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x04a7/0x022c |
Unsupported |
Not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x04a7/0x0362 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x04a7/0x0410 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x04a7/0x0410 |
Unsupported |
Probably not supported. See link for details. |
unsupported
|
? |
|
|
Parport |
|
Unsupported |
Most probably not supported. See link for details. |
unsupported
|
? |
|
|
PaperPort 6100 |
Parport |
|
Unsupported |
Most probably not supported. More details would be appreciated. |
unsupported
|
? |
|
Parport |
|
Unsupported |
Most probably not supported. See link for details. |
unsupported
|
? |
|
|
USB |
0x0461/0x0347 |
Unsupported |
Not supported. See Visioneer Onetouch 4400. |
unsupported
|
? |
|
|
USB |
0x04a7/0x0427 |
Unsupported |
Not supported but may work in future. See link for details. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Compact II |
Parport (EPP) |
|
Good |
300 dpi CCD scanner |
mustek_pp
|
Link(s): http://www.vobis.de/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
HighScan |
SCSI |
|
Complete |
only E3plus based models |
microtek2
|
|
|
Highscreen Realscan |
SCSI |
|
Good |
|
microtek
|
|
|
Highscreen Scanboostar Premium |
SCSI |
|
Good |
OK, SCSI-ID=LinoHell Office2 |
umax
|
Comment: Company was renamed to Benq.
Link(s): http://www.xerox.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0461/0x038b |
Unsupported |
Probably GL646_HP based, maybe can be added to genesys backend |
unsupported
|
? |
|
|
USB |
0x04a7/0x03a0 |
Unsupported |
Unsupported. See link for details. Different id compared to One Touch 4800? |
unsupported
|
? |
|
|
SCSI |
|
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
|
|
USB |
0x04a7/0x0446 |
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
|
|
DocuMate252 |
USB |
0x04a7/0x0449 |
Untested |
|
avision
|
|
|
DocuMate262 |
USB |
0x04a7/0x044c |
Good |
|
avision
|
|
|
DocuMate272 |
USB |
0x04a7/0x0475 |
Untested |
|
avision
|
|
|
USB |
0x04a7/0x0224 |
Unsupported |
Unsupported. See link for details. Different id compared to 4800 One Touch? |
unsupported
|
? |
|
|
Parport |
|
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
|
|
USB |
0x0924/0xffef |
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
|
|
USB Parport |
0x0924/0x4220 |
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
|
|
USB |
0x0924/0x4237 |
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
|
|
USB Parport |
0x043d/0x4303 |
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
|
|
USB Parport |
0x043d/0x0020 |
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
|
|
USB |
0x04e8/0x3903 |
Unsupported |
Not supported. See link for more details. |
unsupported
|
? |
Link(s): http://www.yakumo.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Scan50 |
USB |
0x05d8/0x4011 |
Good |
|
artec_eplus48u |
Manufacturers: Kodak, Polaroid
Link(s): http://www.kodak.com/global/en/service/digCam/dc25/dc25.shtml, http://www.kodak.com/global/en/service/digCam/dc210/dc210.shtml, http://www.kodak.com/global/en/service/products/ekn006568.jhtml
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
DC20 |
Serial port |
|
Basic |
DC-20 untested by author but reported to work |
dc25
|
|
|
DC25 |
Serial port |
|
Complete |
|
dc25
|
|
|
DC210 |
Serial port |
|
Basic |
|
dc210
|
|
|
DC240 |
Serial port |
|
Good |
Use gphoto2 backend to get USB support |
dc240
|
Link(s): http://www.polaroid.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
DMC |
SCSI |
|
Good |
|
dmc |
Manufacturers: Aiptek, Biolux, Connectix, Creative, Digital Dream, Grandtek Scopecam, Konica
Link(s): http://www.aiptek.com.tw
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Aiptek Pencam |
USB |
0x0553/0x0202 |
Minimal |
image is OK for CIF and QCIF, VGA and QVGA untested, streaming video is a problem |
stv680
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0923/0x010f |
Unsupported |
Not supported yet. See link for more details. |
unsupported
|
? |
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
Color QuickCam |
Parport |
|
Good |
Requires root privileges. |
qcam |
|
|
Greyscale QuickCam |
Parport |
|
Minimal |
Requires root privileges. Partly working. |
qcam |
Link(s): http://www.creative.com/
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
WebCam Go Mini |
USB |
0x041e/0x4007 |
Untested |
stv680
|
Link(s): http://www.digitaldreamco.com/en/index.shtml
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
l' espion XS |
USB |
0x1183/0x0001 |
Untested |
stv680
|
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
USB |
0x0797/0x801c |
Unsupported |
Not Supported yet. See link for more details. |
unsupported
|
? |
Link(s): http://www.konicaminolta.com
|
Model |
Interface |
USB id |
Status |
Comment |
Backend |
Manpage |
|---|---|---|---|---|---|---|
|
e-mini |
USB |
0x04c8/0x0722 |
Untested |
stv680
|
Backends: gphoto2, pint, pnm, test, v4l
Link(s): mailto:peter@fales-lorenz.net
Manual
page: sane-gphoto2
Description:
Multiple cameras supported by the
gphoto2 libraries
Comment: The long-term plan is to
support all the cameras supported by the gphoto2 libraries (currently
over 140 models). However, at this stage, only a handful of cameras
are definitely known to work with SANE. Other cameras will probably
work if the native file format is EXIF or JPEG. Testers welcome!
Manual page: sane-pint
Description:
Scanners with the machine-independent PINT interface
Comment:
Haven't been tested for a long time. Handle with care.
Link(s): mailto:henning@meier-geinitz.de
Manual
page: sane-pnm
Description:
Reads PNM files
Comment: Used for debugging frontends.
Obsolete, use test backend instead.
Link(s):
http://www.meier-geinitz.de/sane/test-backend/
Manual
page: sane-test
Description:
Frontend-tester
Comment: Backend for testing frontends.
Also serves as example for SANE backend options.
Link(s): mailto:henning@meier-geinitz.de
Manual
page: sane-v4l
Description:
Interface to Video For Linux API
Comment: Supports video
cameras and other devices accessed by the v4l kernel API, e.g. bttv
devices. Quite a lot of known bugs.
Link(s): mailto:henning@meier-geinitz.de
Manual
page: sane-dll
Description:
Dynamic loading of shared-library backends.
Link(s):
http://www.penguin-breeder.org/?page=sane-net
Manual
page: sane-net
Description:
Network access to saned servers
Comment: Can be used to
access any scanner supported by SANE over the net. Supports IPv4 and
IPv6.
This page was last updated on Mon Jul 3 00:29:33 2006 by sane-desc 3.2 from sane-backends 1.0.18